Deceleration noise at freeway speeds

bump?

 

F@#k it!!! im riding out before some trucker tells me I have a purtty mouth...
If i blow my drive shaft I'll write back.

 

You should be fine man. I drove with mine like that for 9 months.

 

7 year old thread... I'm having the exact same synthoms but I'm 2WD, any idea what could it be?

 

This thread is almost 8 years old but still relevant. I recently lifted my 2013 Single cab and started experiencing the same issue. Noise when lifting foot off the gas. Took some video in hopes that others may find them usefull. It seems that as the drive shaft moves back and forth......the axle will rotate up/down to compensate and noise is generated. Taking it back to the shop next week but would welcome any comments or advice concerning what you see in my vids:

https://youtu.be/RXHOYv5BtW0

https://youtu.be/S7CQHjSxhbM

 

OK - so the short story for my 2008 4x4 regular cab - Dealer performed the rear diff TSB at 3000 miles. It did not fix the problem. During deceleration at freeway speeds (just lift off the gas) it would still make lots of noise. Can't remember the forum - but it said the remove the driveshaft and turn it around 180 degrees- in other words - what was attatched to the diff is now attached to the transfer case. Noise went away immediately and now at 80,000 miles and still no noise.

 

i just came across this tread and having this exact same issue, what fixed it?

 

there was a recall

https://www.tacomaworld.com/threads/new-recall-drive-shaft-replacement.523004/page-2

 

Gotcha thank you!!