Did I lift too high?!? Can it be saved??

Springs are on right.

 

I planning to do the same Lift. Are UCAs necessary on the first notch? Just trying to get a feel for what all I'm going to need. Looking to get 2.5-3" of lift. Will I also need a diff drop too?

 

I did the diff drop

 

You will want UCAs. They are not always necessary but are always recommended for that size lift.

 

You could leave the spacer in. It fixes the infamous taco lean, battery and gas tank and driver on one side makes it that way.

 

He has more spacers than that in it... he also has 1/2” on each side

 

Ok. I’ll drop it one notch and order some UCAs. I’ll leave the spacers in. Will it be ok to drive for a week or so until the UCAs get here?

 

Yeah. Take out the 1/2” too?

 

I would.

 

Not really, your going to kill that c.v. boot and the clanking from the uca is not good, plus the angle on the ball joint for the Uca is incredibly bad. Get that down a notch or 2 before driving it.

 

You should only need the 1/4 on the driver side to fix the lean

 

I really appreciate the help guys. First lift as you can tell. I’ll take 1/2” spacers out, drop one notch, cut cab mount, knock over pinch welds and order UCAs. Hopefully the oem look better after the drop enough to drive it. I have to get to work. Lol

 

The springs are 1.6” lift plus 2.5” from the spring perch. Plus the spacers!!!

 

Good luck and let know how it goes.

 

So you’re saying I put on over 4 inches of lift?!?!

 

Yup, that's what it looks like. Lol

 

Way too much lift

 

Ummm..... I’m an idiot.

 

With cutting you can fit anything......

Even with no lift....

 

No just learning like everyone else does.