1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Discussion in 'Performance and Tuning' started by 12TRDTacoma, Nov 8, 2017.

  1. May 10, 2018 at 1:18 PM
    #4161
    Voodoo Rufus

    Voodoo Rufus Well-Known Member

    Joined:
    Jul 3, 2009
    Member:
    #19255
    Messages:
    822
    Gender:
    Male
    First Name:
    Jason
    Bakersfield, CA
    Vehicle:
    07 Sport Indigo Ink DCSB 4WD
    Magnuson S/C, Relentless armor, Icon/Dakar suspension, Konig CountersteerX 17", KO2's, Hellwig rear swaybar, BudBuilt Trac Bar, Level 10 VBU, Weathertech floorliners, Cravenspeed antenna, Redline elite hood struts, RollnLock, Satoshi, CBI sliders
    Ewwwwww......
     
  2. May 10, 2018 at 1:20 PM
    #4162
    glorifiedwelder

    glorifiedwelder IG= @Liquid_Torch

    Joined:
    Feb 14, 2015
    Member:
    #148647
    Messages:
    3,658
    Gender:
    Male
    First Name:
    jason
    Santa Clarita, ca
    Vehicle:
    double cab trd sport

    My 06 is the same way when compared to the 2013-2015 I’ve installed s/c’s on. I’m hoping when I finally install my ucon it will pep up the lanches a little
     
  3. May 10, 2018 at 2:54 PM
    #4163
    stairgod

    stairgod NOOB

    Joined:
    Aug 16, 2015
    Member:
    #161924
    Messages:
    7,965
    Gender:
    Male
    First Name:
    Jo n
    PA/NJ
    Vehicle:
    2011 MGM Trail Limo
    Locked Boosted 35s
    The pressure rise in a closed system is proportional to the temperature rise. So if filled with fluid that is at ambient temperature, any increase it temp will affect a rise in system pressure. With a 15# cap in my tank, it rose enough to blow excess fluid out. Theoretically , if one knew the exact amount of expansion that would occur at the maximum system temperature, and one could accurately leave enough air space in the sealed system, then an unvented cap could be used. But since there are so many variables, almost every manufacturer uses a pressure relief type cap.
    In your example of a failed radiator cap, the system is not sealed, so it never pressurizes. It would however purge itself of excess fluid as it expands, hence the lack of fluid soewing from the filler neck when the cap is removed.
    And let us not forget the ancillary benefit of a pressurized system. Despite the fact that a 50/50 mix of ethylene glycol and water has a boiling point somewhere in the vicinity of 206*, with 15# of pressure in a sealed system, that figure climbs north of 230*(maybe 240, fuzzy memory on the exact number).
     
  4. May 10, 2018 at 3:47 PM
    #4164
    Roostfactor

    Roostfactor Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Couldn't of said it better myself.
     
  5. May 10, 2018 at 4:57 PM
    #4165
    stairgod

    stairgod NOOB

    Joined:
    Aug 16, 2015
    Member:
    #161924
    Messages:
    7,965
    Gender:
    Male
    First Name:
    Jo n
    PA/NJ
    Vehicle:
    2011 MGM Trail Limo
    Locked Boosted 35s
    :hattip:
     
  6. May 10, 2018 at 9:34 PM
    #4166
    12TRDTacoma

    12TRDTacoma [OP] Powered by Ford, GM, VW, and Mercedes

    Joined:
    Aug 20, 2012
    Member:
    #85133
    Messages:
    16,664
    Gender:
    Male
    First Name:
    Rob
    Concordia
    Vehicle:
    12 TRD Sport DCLB 4x4 Supercharged
    Boosted
    This makes sense.

    Fluid dynamics is not my field of expertise per se, so a little brush up on education here is always a good thing.

    That does beg me to wonder about my own 1 gallon aftermarket reservoir I have and the lack of a diaphragm within the cap it uses. I've never had an issue with it though.
     
  7. May 10, 2018 at 10:00 PM
    #4167
    Roostfactor

    Roostfactor Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Probably because the sc coolant temperature change is not that drastic. Certainly nowhere near that of the engines cooling system.
    Also, how much air space do you have at the top of the reservoir? As the coolant expands (it is a small amount) it will compress the air at the top of the res. This will pressurize the entire system unlike the stock vented cap. If you dont have any leaks then I'm sure your fine.
    It would be interesting to tap the top of the res and put a pressure gauge on it. Vent the system when it cool then run the engine on along trip to heat up all the coolant and check the gauge to see what your system pressure is.
     
  8. May 11, 2018 at 8:42 AM
    #4168
    deeezy

    deeezy Well-Known Member

    Joined:
    Sep 1, 2013
    Member:
    #111645
    Messages:
    5,253
    Gender:
    Male
    First Name:
    Dana
    Hawaii
    Vehicle:
    2013 4x4 DC, 6 spd, TRD Sport
    King ext travel coilovers, Icon tubular UCA's Rear-King "Tundra" 2.5's, Allpro Expos, TRD cat-back, Hurst/Core short shift kit, etc...
    Have any of you with a six speed manual trans ever change the master cylinder under the clutch pedal? What is the procedure to replacing it, so I don't dump brake fluid all over the floor? I would really appreciate it if someone could kinda walk me through the steps. If you can help me, could you please PM me.
     
    Last edited: May 11, 2018
  9. May 11, 2018 at 8:53 PM
    #4169
    ThomasMore66

    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    Wait?! No messages on a Friday night? No Johnson pumps? Still funny BTW. There might have been alcohol to fuel my cunning responses (didn’t finish that for those of you in the know).
     
  10. May 11, 2018 at 9:00 PM
    #4170
    JuanitoBonito

    JuanitoBonito Que Pasa

    Joined:
    Dec 29, 2013
    Member:
    #119422
    Messages:
    9,178
    Gender:
    Male
    First Name:
    Juan
    CHI-TOWN
    Vehicle:
    2024 Raptor
    .........where’s biscuits!!
     
  11. May 11, 2018 at 9:01 PM
    #4171
    ThomasMore66

    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    You may have to let it go.
     
    loginfailed likes this.
  12. May 11, 2018 at 9:03 PM
    #4172
    JuanitoBonito

    JuanitoBonito Que Pasa

    Joined:
    Dec 29, 2013
    Member:
    #119422
    Messages:
    9,178
    Gender:
    Male
    First Name:
    Juan
    CHI-TOWN
    Vehicle:
    2024 Raptor
    Lol, I know. We have a small precious group and we can’t afford to lose anybody.
     
  13. May 11, 2018 at 9:20 PM
    #4173
    ThomasMore66

    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    I tried to get an OVTune member to join us today. He didn’t show up.
     
  14. May 11, 2018 at 9:22 PM
    #4174
    ThomasMore66

    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    Then there was the rando that showed up last weekend...

    @loginfailed hasn’t reported back on the success or failure of the exhaust mods.
     
    mr.trd and loginfailed like this.
  15. May 11, 2018 at 9:31 PM
    #4175
    Taco Suave

    Taco Suave Taco Fever

    Joined:
    Aug 14, 2014
    Member:
    #136131
    Messages:
    708
    Gender:
    Male
    First Name:
    Griffin
    Oxnard
    Vehicle:
    2012 TRD Off Road
    Go fast stuff
    @12TRDTacoma Do you think it would be possible to add more links to the first post of more things that are discussed in the thread? I feel like there is a lot of valuable stuff that has been discussed that is now buried away. And I don't want to overwhelm the front post with every little thing we discuss but It would be much nicer in finding some info.
     
  16. May 11, 2018 at 9:33 PM
    #4176
    Roostfactor

    Roostfactor Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    He will be back. Just a matter of time.


    @loginfailed hasn’t reported back on the success or failure of the exhaust mods.[/QUOTE]
    They must suck!
     
    loginfailed likes this.
  17. May 11, 2018 at 9:46 PM
    #4177
    White lightning boosted

    White lightning boosted Well-Known Member

    Joined:
    Dec 30, 2017
    Member:
    #239848
    Messages:
    8,273
    Gender:
    Male
    First Name:
    Jesse
    Poulsbo
    Vehicle:
    15' DCSB OR S/C
    Lift, pedal commander, led foglights, led interior lights, led back ups, led under lighting, urd tcai, led headlights, methanol injection, 76mm tb, hood struts, dif breather mod, ratiotek trans kit, x-series gauges, true cool trans cooler, belt wrap mod, 2.8 pulley
    Changed all my drive train oils today, and installed @Roostfactor's belt wrap mod. Great job man! This thing works. Surprised the s/c doesn't come with it.
     
    Roostfactor and 12TRDTacoma[OP] like this.
  18. May 11, 2018 at 9:49 PM
    #4178
    White lightning boosted

    White lightning boosted Well-Known Member

    Joined:
    Dec 30, 2017
    Member:
    #239848
    Messages:
    8,273
    Gender:
    Male
    First Name:
    Jesse
    Poulsbo
    Vehicle:
    15' DCSB OR S/C
    Lift, pedal commander, led foglights, led interior lights, led back ups, led under lighting, urd tcai, led headlights, methanol injection, 76mm tb, hood struts, dif breather mod, ratiotek trans kit, x-series gauges, true cool trans cooler, belt wrap mod, 2.8 pulley
    Dummies at the trans shop forgot to order the ratiotek kit otherwise that would have been done too. Only 11 on ebay and Amazon is out. If you're thinking of getting it done might want to order sooner than later.
     
    This site contains affiliate links for which the site may be compensated.
    inwood customs likes this.
  19. May 11, 2018 at 9:52 PM
    #4179
    inwood customs

    inwood customs Roaming potato

    Joined:
    Sep 11, 2016
    Member:
    #197024
    Messages:
    4,712
    First Name:
    Dave
    Vehicle:
    2006 v6 potato bugTuRD
    K&n, flowmaster, plastidip, chipped, hids, daves
    Exactly... i have no intention on doing this soon, but they seem to be vanishing. I had 1 show up wednesday and itll be on my shelf for who knows how long.
     
    This site contains affiliate links for which the site may be compensated.
  20. May 11, 2018 at 9:58 PM
    #4180
    White lightning boosted

    White lightning boosted Well-Known Member

    Joined:
    Dec 30, 2017
    Member:
    #239848
    Messages:
    8,273
    Gender:
    Male
    First Name:
    Jesse
    Poulsbo
    Vehicle:
    15' DCSB OR S/C
    Lift, pedal commander, led foglights, led interior lights, led back ups, led under lighting, urd tcai, led headlights, methanol injection, 76mm tb, hood struts, dif breather mod, ratiotek trans kit, x-series gauges, true cool trans cooler, belt wrap mod, 2.8 pulley
    :muscleflexing:Just want the trans at it's best for my right foot
     

Products Discussed in

To Top