What Have You Done To Your 2nd Gen Tacoma Today?

Time to start rolling coal! Is that a functional exhaust pipe?

 

did you just use 5 quarts of oil and then half a quart of lucas?

 

Picked up a set of used Ruff Tuff seat covers. Missing the head rest covers. After taking them to the coin op laundry to use their big washers, I am in them for $7.50 total. The gentleman that gave them to me traded in his Tacoma to get something bigger and didnt send the covers with the truck when he traded. He just didnt want to throw them away and when he saw my truck at HF, he asked if I wanted them.

 

Full interior detailing. Even removed and washed my seat covers (first time since installing back in 2911).

 

Slider install day! @MobtownOffroad killed it with these regular cab bolt ons. It took longer to prime and paint them than the install. Didn’t hurt having a lift to facilitate access though. The last pic is the shop owners AMX that I got to share space with

 

OK, I feel like an idiot, but could someone please PM me as to how to get a 60 sec.~ Youtube video into a post?
I can copy the link, no brainer but I've seen posts on here that play when you get to the post.
How?

 

I've always copied & pasted the link.

 

I am trying to build an excursion bed rack for her. See how it comes out. What it to have an apocalyptic look to it with a Jerry can, shovels, hi jack and all that shenanigans.

 

Pulled off and refinished my Avid bumper bar and painted my TRD skid

 

Put a new bed mat in thanks to gunny105 at Camelback Toyota and took her for a weekend trip. Everything stayed put in the back.

 

Just installed 3" Toytec Ultimate Lift kit and 285/70R17 Matercraft Courser MXTs on my 2013 double cab long bed TRD Sport. So far on the interior I have done leather seats, LED light conversion and Husky floor mats . LED headlights, fog lights, window tint and ceramic coating coming in the next couple weeks.

 

Very nice truck you have there.

Be Safe...

Dan

 

Finish with lift.

TRD Pro suspension
@HeadStrong Off-Road 1/4 inch spacer up front.
Headstrong 3 leaf progressive
@Wheeler's Off-Road Inc Super Bump bump stops
255/75/17 Hankook Dynapro on @SCSPerformance Ray10s Gunmetal

 

No, 2 of differential oil and 1 of oil stabilizer. "Differential fluid change"

 

Lol... that’s so awesome!! We don’t have wild horses here! It’s such a site for sore eyes seeing them along the shore like that!

 

Any ideas on how to get the pins on the calipers to come out? My father in law and I beat the piss out of them today and we only got one to break free after soaking in penitrating spray for over a 1/2 hour... so frustrated!

 

Of course.. Got it made for $60 from a good friend at a Muffler shop

 

Yea I had a buddy that after I got my in channels ripped his off and got in channels look more sleek!

 

I fixed my head unit control buttons illumination problem. Someone actually posted a solution on TW back in 2015 with my same problem. Although it was somewhat a bit confusing write up (at least to me) I was able to siphor what he was saying and resolved my problem. I feel whole again. Thank you Tacoma World and the member who provided his expertise. By the way, this is not a common problem but only that for those who install small amps and keep sock Entune head units. Apparently, those after market amp harnesses leave out one very important connection on the plug connector for the rear speakers, which is the connection that supplies power to the back lights of the push buttons. That is why everything seemed fine and working properly until I would turn on the headlights and everything on head unit was dark except my screen.