What Have You Done To Your 3rd Gen Today?

Do you have system wright up? I’m scared as hell to even attempt it, but I really want it.

 

I dont have anything written up, there’s a lot of good info on this site regarding people’s methods of getting it done, I think insight retrofits posted a few how to videos.

 

Alright I’ll do some research lol

 

Sweet. You were lucky. I ordered an aluminum skid plate so I’m impatiently waiting on that to ship. Would have loved to pick up some sliders also but those will have to wait a little while.

 

Brought my truck to have clay bared and waxed today while at Mothers Day brunch. Happy Mothers Day also.

 

If you're in Maryland yea.

 

Clever AF!

 

It's a Connor Trailer Hitch lock. I like the fact that you don't need the key to lock it. Just push it together and it self locks.

 

Had to replace the battery today at 29 months.. bummed with that lifespan. I see the OE was a 24F at 582cca. I do already have 65,000 miles on it, but these are long 85mi/day commutes for work, w/o alot of start and stop. I threw in another 24F with over 700cca, perhaps will last 30 months this time ?! here's hoping..

 

#1 for sure!

 

I replaced my wifes Ford Escape battery and positive cable the other day. Was only 32 months and 18,000 miles old. The positive cable was totally corroded and the clamp was 1/2 completely gone. Had to remove wipers, cowl, the cowl drain pan, the battery box cover and then had access to the battery. It was basically between the speedo cluster and the master cylinder inside a covered box. After all that work, to access the negative clamp and cable, the negative was as clean as a pin. Battery had life in it but decided I didn't want to remove all that crap 3 months from now to replace it. We are lucky Taco batteries are where they should be.

 

Awesome! I was reading several reviews which stated the pin was too short. Just placed the order! Thanks

 

Love the BHLM. What sux is a lot of Mopars in my area come with the black headlights from the factory. Then again, for any "lucky" Mopar owners, there will be tons of cheap Mopar black headlights in junkyards real cheap in the near future.

 

I got the black nickel it's 3 1/2" inches long which is plenty and it comes with 6 O-rings to keep it snug and from rattling. I only needed 3 for mine.

 

I didn't do the T junction either. Joining the bags to one junction can actually reduce their performance with load shift. I.E. you turn a corner with a heavy load the weight will tend to push on the outside airbag which will force the air out to the inner bag defeating the purpose of having airbags. The T is fine for most trailer load leveling.

 

Same one I’ve been looking at. One of these days I’ll pull the trigger and order it!

 

3M 1080 Vynil Matte Finish. Never done this before. The scoope took sometime and had to use heat gun couple times. I did use knifless tape to cut. I did make small error on the right corner but it looks good.

 

A few months back I ripped the valence off of the front bumper while wheeling and didn't notice till I got home. Toyota wanted $300 for the stupid peice of plastic! Most other sites were 200 to get it to my door.
I devised my own solution for $75!

 

out with the old... (check how bent the brackets are lol)



on with the new...

 

285 spare in
Cali Raised CB antenna mount done
Fender liners trimmed