Caliraised OEM switches

Hello everyone

I called Caliraised a while back but they couldnt give me a specific answer, has anyone figured out what style/size switches fit the third gen switch panel?

https://caliraisedled.com/collectio...016-2018-toyota-tacoma-oem-style-switch-panel

I need to get a three way (non momentary, on-off-on) for back up lights, but I cannot seem to locate one through at my local auto store. Online, it's a useless search full of "almost what you searched for". Even if I have to use a blank and drill a whole for a simple toggle switch, I'd be OK with that if a switch does not exist.

About the best solution Ive found is this, but I'm not quite sure if it will fit:

$12 Bandc 7 Pins 2 LED Light On-Off-on Marine Boat Rocker Switch Dpdt Waterproof 12v 24v

https://www.amazon.com/dp/B00EBR0U5...a7df-eac93c35e970&ie=UTF8&qid=1526324748&sr=3

Thank you!

 

Waterproof Illuminated Double Pole, Double Throw 3 Position On-Off-On Rocker Switch DPDT

$19 Waterproof Illuminated Double Pole, Double Throw 3 Position On-Off-On Rocker Switch DPDT

https://www.amazon.com/dp/B001PNKF06?ref=yo_pop_ma_swf
This switch is the best option in my opinion, it will fit with no cutting or anything. If not this then something with similar dimensions

 

Good find, I really like the two different colors for the on positions. That thing scares me with 10 prongs, wiring is not my best...

 

Looks like they have a wiring diagram here

https://www.gamainc.com/product/232e3-bb/

Maybe it's me, but that seems more complicated than I expected for a DPDT switch. Would this be considered a double pole DPDT? Any help on how this might work would be greatly appreciated.

Edit - Actually, thinking through it - it's not too bad. I think I let the number of prongs intimidate me.

 

It's a double pole double throw, from just looking at it i believe the top two prongs will be turned on when flipped that direction and vice versa for the bottom prongs

 

Posting in case anyone else needs the info. I broke out my reloading calipers and took some measurements, the caliraised cut outs are 1.381 tall and .665 wide. (note, that is the measure of mine - yours may be slightly different). The "Toyota OEM switch" is not the same size as most auto/marine switches, so you'll want to be careful when ordering switches.

The good news is, using digikey.com you can find all kinds of switches. I found several that would work well enough, just look as nice as the previous ones posted.