Bilstein 5100 settings without rear TSB

Folks, I have a 2005 Taco Access Cab 4x4 with TRD Coils and I am getting Bilstein 5100s (front and rear) soon from DSMS. My truck had already passed the "mile marker" to allow the stealership to comp me a TSB on the rear. My question is what settings do I need to set the Billy's so that my truck is relatively level. I have a three leaf system and don't anticipate getting a 4th rear leaf any time soon. Please let me know so that I can get my truck done right the first time. Thanks.

 

You might want to post some measurments of how it's sitting now.

 

You should be pretty close to level at the .85 setting. But def take some measurements first.

 

Ill sell you my TSB pack if you want the 4 leaf...

Oh and I had the 5100 set at 1.75 without the 4 leaf pack and it was about level then.

 

If Dawg isn't interested, in the TSB packs I would be.
Let me know

 

A whole bunch of us are waiting for the billys to be stocked at DSMS...I like the "soon" part in your first post. Good luck with the install. I'll be doing the TSB and setting the fronts at .85 w/ the Eibach coils sitting in my office. Don't forget to install the 1/4" spacer to correct the Taco Lean.

hip

 

I ordered mine from suspension connection they did me right. Mine are set at 1.75 and i have to say its about as level as its gona get, almost perfect.

 

How much do you want for the 4 leaf pack? Or should I just AAL?

 

It's up to you, but I think the toyota 4 leaf pack would be worth $300.