The Lair

Even better question. Did you buy the ex drinks too?

 

Ah. Now I get it.

Still should walked outta there.

 

Yeah, questions about the ex are always a trap. There's no right way to answer

 

Alright folks. Need a favor kinda quickly. Can someone go to their truck an tell me which color goes to which?

Rear wheel sensors, I really just need to know one wire. I should be able to figure out the rest from the diagrams. Start at whichever side you want, follow the wheel sensor wire across the axle into the bigger harness. That harness goes up to 2 different connectors. The connector I need you to look at had 4 wires and is the smaller of the two.

I just need to know what a blue wire is connected to. There should be two. It doesnt matter which blue wire.

 

Give me a min and I’ll go out in the rain for you because I’m feeling nice <3

 

Yes there is.

 

What's that

 

The Sex was just meh

 

Here you go. The outward two wires go to the drivers side and the inward two go to the passenger side.

 

oh yeah talking about sex with your ex is not safe at all. doesn't matter how bad you say it was

 

You're the man! Thank you!

 

@EatSleepTacos by outward and inward, you mean towards the back of the truck (outward) and inward is towards the front of the truck?

 

Between your description and @fatfurious2 help also, I got this.

 

Yes exactly. The two you can see in the pic (that face the rear of the truck) go to the drivers side

 

Thank you, all fixed. Now to reset everything.

 

Did you even add in a connector or just solder the wires back together?

 

No connector. Cut the good one off but left myself 3 inches of wire on it. Twisted, soldered, heat shrunk. I pulled the wheel sensor wires all the way out of the corrugated wire loom to give me more slack. They're currently "floating" in the air, only taped every so often to keep them from flopping about. I'll get some more corrugated loom to wrap around when I go to the parts store today.

 

Hahaha I like it. The ultimate frugal solution.

 

It's actually better than OEM now lol. Other than the fact that it's not as easily disconnected via the connector. I have more travel in the wire haha

 

That's a lot of large heat shrink!