South Carolina BS thread under new MANAGEMENT and lives in SC

I torq mine, they are light, like 15 ft/lbs if i recall correctly. Easy to put to much on em. Verify this tho.

 

Mines goes to 10 I think but I don’t have the right size drive. Need to get the extention for the smaller drive.

 

I applied anti-seize.

The low idle appears to have gone away, so i don’t know what was up with that.
Now, it’s that vibration in the front end, possibly the wheel bearings. Just going to replace those too when I do the CV axles and brakes in a couple weeks.

 

I was considering but that's right after vacation so I kinda doubt it. A little too far for a day trip.

 

We need to schedule another upstate meet

 

No anti-seize. If you do that torque spec is out the window.

 

Meat meet already planned...live music, beer, BBQ, portashitters, Pat, and tacos.

Edit: And camping.

 

When ..

 

Tagged you in the thread.

 

It’s getting nicer out so a Wal-Mart parking lot party sounds good.

 

In Jimbo's sig. 6/23 but in Lancaster. Not really upstate lol.

 

14ft lbs or 168 inch pounds is the stock spec. I would and use anti sieze. Torqure speaks will be off as Tim mentioned with the seize. 12ft lbs or 144 in pounds should be the corrected torque spec with anit sieze. Honestly if ya use sieze and use factory specs you will be fine.

 

Haha! whoa, there's a reason they only sell these in 4 packs.

 

Pressure is what will cause promblems. The way the heads are though you really gotta torque the living piss outta them to have problems

 

Haha planned on selling them, I’d take $40 for them, literally got them for Christmas, just installed them 4 days ago and then trade the truck haha. New hi lift jack I’m looking to move also, I’d take $60 for it. Just pulled it out of the box a few days ago also.

 

do the mounts go on the bed rails? And what brand?

 

The anti seaize acts as lubricant which reduces the manufactures spec roughly 20%, but you need to use what the manufacturer says the lubricated spec is. Our 40 year Toyota mechanic friend says don't use it, but I don't think it's because of torque. Don't remember. Shoot him a PM if you want.

 

Haha I’d take 200 for the covers, they’re black with red TRD emblems on the headrests. Got one ahead of ya in line for those if you’re interested.

 

They’re black with red TRD emblems on the headrests, asking $200. Got a couple ahead of ya lol.

 

@OCD 08