AZ BS Thread 4²0

some drunk guys made fun of me before the rock crawl.

 

pretty much. The podium was too high, I couldn't see that far

 

Did you tell them that you were balancing the books before crawling? #BeanCrawler

 

Make sure to go by the TC booth and look at theirs

 

And Cody in the pic.

And my brother is in the back Ground too

 

Yes please.....
1993 Toyota Cresta Tourer V

https://tucson.craigslist.org/cto/d/1993-toyota-cresta-tourer/6589295733.html

Up for sale my pearl white 02/1993 JZX90 Cresta Tourer-V, which is a rear wheel drive sedan powered by a twin turbo inline 6 cylinder (non-VVTI 1JZ-GTE) engine. This vehicle was properly imported from Japan and has 31k original miles (JEVIC certifie ...

 

So anybody know of a good fab shop that can help me put together my light bar adapter? I installed the SDHQ mount today and it looks like the front most lower mount slot is gonna be perfect for what I had in mind, which is a row of 6 squadrons across...



There's not even that much obstruction of the actual LED itself, thought I may still have to cut a little depending on how it all shakes out.

All it looks like I need is a flat piece of steel or aluminum with 2 90 degree bends, and some mounting slots milled in. Really basic, shouldn't cost a lot, but I wanna do it right and I don't have a press brake or mill.

 

Wasn't there someone on the AZ board that works at a dealership? Looking to purchase a Camry for my cousin.

 

Why not just do a light bar or two?

 

Light bar stickers?

 

New tire carrier finished and tailgate just about done. Made from 90% recycled old tire gate



Just waiting for a piece of aluminum to top the table and she'll be done

 

Home Depot apparently sells bottle openers in black

 

Check this out, V16 and 5000 horsepower https://www.instagram.com/p/BiuO8gzlwnG/

 

For the bottom row 3x pairs of BD squadrons is cheaper than a BD S8 30". The squadron array is almost double the lumens too, and on top of that less light lost from behind the proto-TSSP mount and to various obstructions of the pro grill which basically totally blocks 2 of the bar LEDs and partially obstructs a few more.

TL;DR big dick light output.

I'll probably still go for a bar in the upper slot simply because it would be easier.

It's what every plate bumper needs!

 

Sounds like you’ll be able to light up your video games buddies houses pretty well

 

So 3 sets of squadron sports equals $690 before tax, and equal a total of 13560 lumens.

1 30in s8 is $850 before tax, and the same lumens at 13560.

It just seems your reinventing the wheel like usual, to gain a little bit of light that lets face it your never going to need. Your also ending up with 6 things that can independtly break or have issues on there own vs only 1 bar.

Also if you want big dick light output you would do an onyx light bar, or lp9’s.

 

Bro he’s a baller. It’ll match his triple bypasses