50+ thread

But I did this...

 

Nice Job Tim!

 

???

 

$$$??

 

That's not the only Baldwin Motion decal I've got on my Camaro , I've got these also !!!

When I originally built my Camaro almost 20 years ago I built it to be a Baldwin Motion clone . I made it into a Baldwin Motion Phase III Z30 sbc Camaro , I even had Motion Perf Valve covers and a hard to find Fly Eye air cleaner

Here's a few of the other decals ..




Yes that Marlin Crawler with the Taco Box 3 t/case set up is awesome .If I ever get a Toyota 4x4 that's going to be one of the modifications

I used to go off roading with Marlin back in the early 90's when his truck only had (2) t/cases and I was impressed on how easy he made the hard trails look

 

sorry

love mine!!!

go put them on!!!

 

Chuck! I remember we had the Baldwin Motors discussion before It would be great if you kept the parts.

Good Afternoon Pretty Lady!!

Yeah I had them on the ‘14 and always liked them.

 

Genuine Motion air dam.....

 

I still have most of the parts and they're in boxes for safe keeping but I did however sell the Valve covers to someone who is restoring a Baldwin Motion Vette

 

Here’s the group buy Greg, I purchased the quick lift plus:

https://www.tacomaworld.com/threads...klift-systems-group-buy-ends-may-31th.549085/

 

Cool Deal! Will the valve covers fit on the motor your presently Running in that bad Boy?

 

How easy/difficult to install? Any special tools needed??

 

Nope I need you use tall valve covers as I'm running aftermarket Roller rockers

 

Hi, It’s not to difficult. I put layers of tape on all surrounding areas that I’m about to drill for protection just in case you slip with a tool. I measure a few times and double check everything before I drill the mounting holes.
It helps to have a decent Rivet Gun, and be prepared for the gun to walk on the final pull. I wrapped the 3/16th drill bit with a good layer of electric tape as a stop, with a 1/4” tip showing so you don’t drill through the Hood. You can also use drill stops. I used toyota touch-up paint on the drilled holes. Other than that you just need to take your time, and enjoy working on your Truck.
Here’s a list of stuff you need to gather.

 

I hate this damn phone

 

Rivet gun is missing from our arsenal... Will have to check out the cost on that first...

 

Here’s one:

 

Well damn. I'll just go to Harbor Frt tomorrow then, if they're that cheap...

 

Haven’t seen the ones they offer, but should work.

 

Stay away from Harbor Fright rivet guns. They tend to jam, leaving the gun attached to a half installed rivet. Then you have to break the rivet and drill it out.
If you want a free HF rivet gun, there is one in the vacant lot next door to me. That's where it landed after it broke the rivet in my tailgate.