50+ thread

How easy/difficult to install? Any special tools needed??

 

Nope I need you use tall valve covers as I'm running aftermarket Roller rockers

 

Hi, It’s not to difficult. I put layers of tape on all surrounding areas that I’m about to drill for protection just in case you slip with a tool. I measure a few times and double check everything before I drill the mounting holes.
It helps to have a decent Rivet Gun, and be prepared for the gun to walk on the final pull. I wrapped the 3/16th drill bit with a good layer of electric tape as a stop, with a 1/4” tip showing so you don’t drill through the Hood. You can also use drill stops. I used toyota touch-up paint on the drilled holes. Other than that you just need to take your time, and enjoy working on your Truck.
Here’s a list of stuff you need to gather.

 

I hate this damn phone

 

Rivet gun is missing from our arsenal... Will have to check out the cost on that first...

 

Here’s one:

 

Well damn. I'll just go to Harbor Frt tomorrow then, if they're that cheap...

 

Haven’t seen the ones they offer, but should work.

 

Stay away from Harbor Fright rivet guns. They tend to jam, leaving the gun attached to a half installed rivet. Then you have to break the rivet and drill it out.
If you want a free HF rivet gun, there is one in the vacant lot next door to me. That's where it landed after it broke the rivet in my tailgate.

 

I believe we have found Noah's hammer.

 

You're right. I was getting anxious. I can order the Amazon one and still have it here in plenty of time for the GB...

 

Recent USGS News Conference for the Kilauea Volcano


https://youtu.be/Tg51mf1hfCs

 

They tend to have some "ok" tools. I don't know about their rivot guns, but similar tools (with multiple moving parts) they offer feel loose and not engineered very well. I buy their hand tools, trash pumps and an occasional generator. Other than that, not much.

 

Hi neighbor! Lol yeah it’s an oldie fur sure! Hope all is good up your way.

 

Howdy Jim! Still holding up ok, I guess. Lots of changes at work making me rethink my trust in our leadership. Usual crap, we live by the Peter principal at my company.

 

You can tell an Estwing by the ring it makes.

 

Yeah at our age it gets stale, hang in there bud!

 

You can hammer this yah wood chip eater !! Lol
There are a few others in the truck, camper And gun kit so pffff! Keep your plastic toys where they belong in your ....nightstand lol


Cypher

 

hello people!!