What Have You Done To Your 2nd Gen Tacoma Today?

That's on the list before the painted grille is re-installed!!

 

Yesterday fit & modify to fit!

 

Are these brackets your talking ab or are you suggesting I rig something up , yesterday fit ?

 

Just marking this cause I am considering this set up!

 

Test fit. Damn auto spell...

 

Haha thought ab it ,to me it looks like a first gen or it’s missing a peice for the back the front looks correct. 50 bucks is what she is asking but I’m usually on a tight budget so I’d rather just kno for sure before I Waste money

 

I did a light install

 

Couldn't have said it better myself.

We will always remember those that never came back.

 

Took the kids to bishops castle to scare them and realized only scared one was my old add! Haha. Then gave the Toyota's a spring wash.

 

Modified the Budbuilt front skid to sit higher in the front, gaining about an inch of clearance at the crossmember:







Hard to find M12x1.25 stainless bolts. Ended up buying two lambda sensor blanking plugs on eBay: https://www.ebay.com/itm/O2-Oxygen-...-Blanking-Bolts-2-with-Allen-Key/142547088104

 

Racing out of work!!!

 

Still tearing!!!

 

Yup

 

My Wife did the same thing to Her Sequoia at the mall one day the whole time I was in the passenger seat yelling STOP!!!

 

Installed the front ADS clickers and UCA's and made some 2016+ Tailgate Locks at the same time. Have to torque things in the morning and install the rear leafs and shocks. Feeling a little sick, may have to take Tuesday off too

 

Thank you!

 

Like to thread?

 

https://www.tacomaworld.com/threads/how-to-throttle-body-cleaning-2005-v6.94203/

 

Memorial Day is usually a day we remember the fallen, but let us never forget those who remain who never made it home the POWs and the MIAs! Gone but not forgotten!

 

Just relocated the horn and installed the BAMF behind the grill light bar bracket. Very simple install and solid as a rock. Getting the three lower panel pins for the grill off was the toughest part.
So with the bracket on and the AOB switch in hand I need to decide on a 20” light bar. Kinda torn between the KC Highlite and Caili Raised at this point. If anyone has either one and can let me know how they perform it would be appreciated.