What Have You Done To Your 2nd Gen Tacoma Today?

I did the same thing to mine. I thought they were too long to begin with, but when the white paint on the 4x4 started coming off I trimmed them down.

 

Mounted my new to me tent, to my new @KB Voodoo rack

 

Today I took off the front mudflaps... the rubbing from the new BFGs was driving me nuts.

Downside is a fair bit of splatter down the side when driving in wet weather. Bah.

 

Turning 50,000 miles tomorrow, changed filter,oil,and greased the U joints today.
Truck is almost broken in.
Fluid Film applied at 49,0000 miles.
Ready for summer driving.
First trip to North Attleboro Ma. tommorow to pick up a open trailer.
TOMB

 

Those turned out nice. Did you use a template?

 

Wait til you drive with your window down and hand outside. I always get splashed going thru puddles.

 

TRD Pro suspension and General Springs HD leaf pack installed. Sticker mod for my freshly forged Marine.

 

Spent all of my truck parts money on a rifle today lol oh well



But I did drive my truck to get it so it counts

 

Not today, but yesterday. I sound deadened the front doors with 80mil Noico sound deadener. Did the exterior skin areas and only the holes on the interior panels.

 

Sanded and buffed the headlights, then had a mini photoshoot with taco. MGM looks great when it's overcast.

 

Just ordered some Hella 500ff lights that I plan on mounting behind the grill! will post pics when I get them...also if anyone knows a writeup to wire these up that would be great because when it comes to wiring I am lost lol

 

I had a SOCOM 16. Didn't care for it & like my AR10 much better. Everybody needs a semi-auto .308!

 

How much a difference does it make? ive been wanting to do the doors

 

One down...

 

Put my SOS Concepts aluminum winch bumper on.

 

Not a bad truck day, Changed the plugs and cleaned the maf sensor and throttle body. Butt Dyno says I musta picked up least 300 horse at the tires.

 

I don't know. I haven't even cranked it up yet. I hope there is a good difference with all of the work. I was getting a bad amount of distartion from the Memphis Audio Power Reference 6X9s. I used 7.5 of 9 sheets of 18 sq ft Noico 80mil deadener from Amazon

Noico 80 mil 18 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

https://www.amazon.com/gp/product/B012B5EMGO/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 to do just the front doors' exterior skin and just the holes on the inner skin. Supposedly this should have been enough to deaden all four doors and the back wall.

 

Spent the day painting my rims. Turned out a whole lot better than I expected! Products used were gloss black Duplicolor high-performance wheel coating, red testors model paint for the trim, and Duplicolor wheel gloss clear coat.
Note of caution: the clear coat seemed to cause the model paint to spread a little, even after an hour of drying. Not sure if I should have just let it dry longer or if it caused a little reaction, but it was nothing too major.

 

Yep. Traced flap outline on cardboard. Flipped over template for left side. Just eye ball’d it