Tacoma - OVTUNE - VFTUNER - Update Info and Original Development

the average time is not 4-6 weeks, and a majority of new kits, dongle-less have been less than 2 weeks. Of course it should be more efficient, that's why I have said 100x I took my site down and am making an all new system. Said that nearly 100x on here.

under 12v is

 

Got to 1/29. Was so excited. Then failed again

 

It keeps getting better

 

@OVTune is there anything else I can do other than try over and over?

 

I'd say just to rule it out try a different USB cable if you have one

 

Normal.

Battery seems to be good. You pressed the push start button twice? Truck isn’t running, correct?

 

Correct. Truck says ignition on, but not running

 

New USB, same result

 

You've been at this for a while now. Throw a charger or battery tender on it.

 

I have a portable jump starter connected

 

Also, plug your laptop in while flashing.

 

Do you have any added light bars or other mods that may have a voltage leak somewhere ?

 

Plugged in

 

I do, but I took out the fuses

 

What's the voltage reading with the jump starter connected?

 

~12.3

 

Good call. Need better brakes.

 

Hmmm...I would have expected it to be slightly higher with the charger connected.

 

Mine was 12.4 and completed just fine.

 

You may try running windows performance monitor, and see if something else is running in the background that might interfere. Also disable WiFi and Bluetooth in case there’s multiple devices at your home trying to connect..