Colorado Trading Post

Anyone have a set of stock 2nd gen tails they want to sell? 40$??

 

Looking for a Prinsu Toprac for a 5’ bed. Lemme know if you have one!

 

I’ve got a brand new, still in the bubble wrap sliding ladder for a CVT. Although I’m sure it will fit other tents $100

 

• Selling a 12V ATV winch, Harbor Freight, 3500 lbs includes the 4000 lbs block - $100 or best offer
• Sea Volt (West Marine's brand of East Penn) group 27 AGM - 12 pack (ETA: Battery is spoken for)

Winch was mounted to a gantry I used to lift camper shells. The gantry is gone and we're moving, I don't really need it. Works fine, it was outside maybe a couple of weeks and has been sitting in the garage for probably a year.

I've had the battery a long time (at least 8 years) and it's probably marginal. It settles to around 12.55 V about after an hour off the charger (was 12.9 V immediately after pulling it off the charger). It's been very reliable and I haven't abused it. Probably has 6 to 10 cycles on it, mostly it sat floating under my ham radio station. It's never been reconditioned so there's a decent chance that doing that will help and if so you'll get a bargain. The fuses and volt-meter are not included.

Located in Loveland

 

I have three sheets of RoadKill (24"x12") and one sheet of Dynamat (36"x12") if anyone wants to trade for a six pack of DBC Pretzel Assassin?

 

Ceiling fan anyone? Both will be available by sunday evening...

First one is ready now, second is coming down tomorrow.. second one has a controller.

First $30
Second $50
Obo

 

@Coop68

 

SOLD

5 SCS F5 16x8 3.5bs in gunmetal. One small scratch on wheel lip in the first pic, otherwise excellent condition. The four that were mounted have about 6k on them the one in the box has never been mounted. Local only for now.
$750 obo

 

I have a pile of stuff I am looking to off load. It’s been in my garage forever so just make me some kind of offer. Beer and cash is accepted.

• OEM upper control arms for a 2nd or 3rd gen Tacoma. Less than 1000 miles on them. Practically new.
• OEM skids from a 14 Tacoma TRD Off Road
• Stock fender flares from a magnetic gray 2014 Tacoma (some clips broke but otherwise good condition)
• 2 WeatherTech bug deflectors (no mounting hardware) for a 2012-2015 Tacoma
• Stock Entune deck from my 14 Tacoma
• Full LeBra front end cover for a 2005 Corolla S. Brand new, never used, still in the box
• Stock head unit from a 2005 Corolla S
• Carpet floor mats from a 2017 Hyundai Tucson
• Carpet floor mats from a 2016.5 Mazda CX-5

Just let me know!!! Thanks.

 

Thanks Josh, I couldn't remember who was talking about a garage hoist.

 

Holy heck this is a great deal for some nice wheels that are surprisingly tough to buy new... if they were the bronze ones I'd be all over them.

 

Thanks areadly figured out what i am gonna do for now!

 

Asking $350 $300, or make an offer. They are first come, first served.

Four 2004-2006 Tundra alloys (16x7, 15mm offset which gives you a slightly wider stance than stock 2nd Gen Tacoma wheels), very little wear-n-tear. TPMS sensors and lug nuts included.

Goodyear Wrangler MTRs (the old/beloved ones) LT265/75-16 Load Range D with varying tread left (couldn't find my tread depth tool; didn't think to grab a coin either). One is great (close up pic below), one is OK, and two are right at, or almost to, the wear bars. These are siped, and were offroaded, so there's some chunking and worn lugs. If you want that "Hell yeah, I offroad" look without risking damage to your truck... look no further.

All four:



Each wheel closer up:









Here's a close up of the best tire next to one of the two that are worn:



And a final one showing the tread right at a wear bar on the most worn one:



Fresh off the truck, washed, and ready for you!

 

Got a few things looking to purge...
Beer me some Bass and the OEM fog lights and rear storage are yours.
$30 for the 10" CaliRaised spot light(NIB)


Also, anyone have a kid that needs a bike. This would be for a smaller kid. Been lightly used.
$30

 

I have some bronze ones and I was looking to go with these gunmetals as a way to change things up. Mine are the same but 0 offset and have a few more (lets say many more) scratches

 

Is anyone interested in a TRD skid plate for a second gen? i also have an Avid Off road bull bar. both have hit their fair share of rocks....
Skid plate = $50
Avid Off road bumper guard $75

 

I posted these a while back, but it took me forever to finally get these off the new shocks.... Anyway brand new never used Icon 700lbs coils off of Icon 2.5 extended travel shocks. looking to get $185

 

[CL buyers flaked. Still for sale.]

2007 Carry-On 7x12GWRS ATV/Utility trailer. Excellent condition. $1400 obo

https://denver.craigslist.org/tro/d/7x12-atv-utility-trailer/6606988611.html

 

I have a set... pm me

 

Saw the link on your fb didn't work and figured it had already disappeared. Too slow.