DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

#boughtnotbuilt

 

#raceme

 

Down Twister

 

nope. im gonna pass on that. hahahaha

 

Sure, half as much HP, twice as many spinny wheels

 

You don't need 4wd to go down

 

my rig is in the process of being fully built. once i get the dana 60 in the front and lock it and put on the 38s its done.

 

Maybeeeee

 

Where in dallas are you, my buddy and I are wanting to do a SAS but I’m on the fence of going an older t case that’s gear driven and passenger drop to run a Chevy front axle instead of the ford

 

Definitely got a few dings in the roof of the Tacoma. So far haven't seen anything major on the hood or sides.

 

Totaled

 

im in plano. im slowly buying parts here and there as i get the money. ive started putting money in armour. like rear swingout bumper, and skids,and rock sliders

 

O'rly

 

That's probably the way I'll go. Sons car took some hail too.

 

depending on what engine is in it the tranny/transfer might bolt right up to the current bell housing, im slowly collecting parts to SAS my old 1st gen and the W56 will bolt right up to the 2.4 bell in it.

Found someone on pirate4x4 that did it on the same truck and here is what theirs looks like from here





http://www.pirate4x4.com/forum/toyota-tacoma/935572-hacksters-tacoma-project-2wd-4wd-sas.html

 

1st gens are the best!

 

Whoa easy now. Boys get a rope.

 

Whereabouts are you? Place I’ve always gone is Dent Tech in Plano.

 

This is where I’m at s crossroad, my 12 is an auto and I’m on the fence about doing a SAS. My 85 is solid front but I’m debating a 3RZ, 4.3 and possibly a 5.3 LS and using the 14 bolt I have and getting a front axle. I don’t know what to do

 

im in central plano. custer road and park blvd