Bilstiens with 888 coil

How many time have you been back to the shop about this issue?

 

I only reconfirmed what components they installed and thats about it

 

Gotta go to work burlt will definately look at tge coil closer and hopefully postca pic later. Thnx for the help

 

Where are you located?

 

I would demand a comparison. I would get stock height measurement and compare it to your truck and get a measurement of a truck with 888's.

 

Top is a pic they sent me right after install if it helps

 

The tag does say 888x

 

There should be a number on the spring, not the paper tag. Wipe them down with a rag and see if you can locate it.

 

that's definitely noticeable even from a picture. probably easier to notice in person. like the above guy mentioned I would get the number and def do a comparison of the spring.

 

Damn this looks so good!

 

agreed^^

 

I have a 2016 Toyota Tacoma DCSB, I ordered the Bilstein adjustable with 888 coils 1/4" spacer for drivers side and OME dakar leaf springs for the rear. I started with 21" in the front & 22" in the rear. When I did the lift I had about 23.75" in the front and 24" in the rear. Now after settling I have 23" front and 24" rear. I have rubbing for sure on the cab mount and a little on the plastic. I have tried to contact Bilstein /OME & "Headstrong" where I ordered the lift from and can't find an answer on how to get the lift level all the way around. I thought maybe add a top spacer to gain more lift but have not found any info on this problem. If anyone knows how to fix the problem please let me know.

 

Id say a little rake is good for the truck, you dont want to be nose hight when you putbsomething in the bed

 

And i dont rub on 265/70/17 with -10 offset. Just take the mudflaps off