What Have You Done To Your 2nd Gen Tacoma Today?

you ever been pulled over?

 

What a beautiful truck!!!

 

What size lift and size tires are you running?

 

Beautiful truck man! Can u tell me lift size and tire size?

 

Not once, even in Virginia Beach where the cops love to write tickets.

If I used red or blue it would be a different story.

 

Set up my onboard water system today. 18 gallons with a 2GPM DC pump in the spare tire cavity.

 

Water pump service at 112k

 

Any tips for changing the power steering fluid without making a huge mess? I need to do mine too and didn't know if there were any tips or tricks for these trucks

 

From another thread on here


1. Disconnect return line to reservoir. (Not the line that goes to the pump.)
2. Plug reservoir inlet and direct drain return line into a container. Fill reservoir with fresh fluid.
3. I used Mobil 1 Synthetic ATF.
4. Jack up front wheels off the ground.
5. Turn steering wheel (do NOT start engine) back and forth. This will pump ATF through the system. Refill reservoir as it drains.
6. After a quart I was getting clean ATF from the drain line so done.
7. Reconnect drain line and fill as necessary.

 

Did this minus disconnecting the return line. I used a little oil bottle pump and sucked the reservoir empty, added new Mobil 1 ATF, turned vehicle on, turned wheel back and forth, repeated until the quart of ATF was gone (3 iterations if I remember correctly). Maybe not as efficient as the other method, but my fluid went from dark and old to new pretty quick.

 

Doesn't hurt to add Lucas stop leak in the ps res too.....I use a Cajun injector syringe to drain res and then refill. Dry boots FTW. Also works swapping in a res of fresh brk fluid or to remove some if pushing caliper pistons back in when putting on new disc pads.

Fresh oem filter and Castrol hi mileage oil for mine this wknd.

 

Lol my thoughts exactly got one more strip I’ll probably add later today then not sure where I’ll go from there

 

What kinda did you use for the grill I thought about buying some amber / orange /

 

Dam, this would look good w/a lift. But alas just a tire rotation and a visual check of everything while the wheels are off.

 

DANG! Smart man! I’ve been looking at roof racks just for plywood and MDF. might have to look into these too

 

Didn't like the mounts that it came with? I don't have a rotopax yet but I'm going to grab one eventually and I have the same bumper.

 

Washed it and threw a quick wax on it over the weekend.

 

I'm not sure about the manual. I just used the conditioner that came with my canvas care kit from chemical guys. Scrubbed it up real nice then let the conditioner do it's thing. It's my first time actually cleaning my ST thoroughly.

I did use the supplied seam sealer once just because I could see bits of light coming through some stitching.

 

Redline Tuning hood struts and UNI filter installed this morning.