Norcal Spotted and BS Thread

Looks good!!!

 

Thanks for all the input...I suck at wiring...since it so little draw, would it be okay to run it constant hot all the time without a switch?

 

Anyone need a 1st Gen transmission crossmember before I chuck it at the dump tomorrow?

 

i have a stock 2015 head unit $50 bucks to good home

 

wonder if this works on 2013

 

im not sure

 

Nope, your correct. short runs no issues.
I've pushed it many times and no issues. I have heard that fridges can be picky in voltages as some have auto shut offs when voltage gets to low so in that case you want all you can get. But must stuff will run fine + or - 1%
I run my compressor on 10g and its probably close to 20ft run. from battery to relay at the rear to the compressor in the bed. I'm guessing close to 20ft of wire on the power side. works great! chart says I should be using #8 or #6. But you no me if it works fuck it. at the compressor I have only 12v though it should be 13.4v that I have at the battery. that's a little over 1% voltage drop. I might get a little better performance out of the compressor if I up size the wire. But for now it works.
I really am not that vrs in DC, I'm a med voltage electrician I deal mainly with 120/208v and 277/480v AC.

 

Anyone here have experience doing the ECGS bushing? Recently lifted the truck and I have the slight humming/vibration at low speeds. Just ordered the bushing/axle seal, and removal tool. Watched a few videos regarding it and I feel competent doing the install but if anyone here could help, that would be awesome.

 

Congrats!

 

Man, that guy parks like an asshole.

 

That thing have Nav?

 

Going through the house before we start renovating and noticed this in the corner of the master.



I’ve seen how this goes on reddit. I’m fully intrigued.

 

There’s a million dollars in there.












Or a million dollar vibrator.

 

it was a 73 year old old lady's house.

im going with the later

 

Open that damn thing up!

 

is locked. gotta call out a locksmith to see what they can do

 

I too, am now intrigued.

 

drill that little bastard. I have a friend who was able to get into the big gun safes in about 5 mins and it would have been faster but he broke a bit.