AZ BS Thread 4²0

Liked, so I could unlike and like it again


Congrats buddy. Bring on the house party

 

Thanks dude! I'm excited but itll be chaotic for a minute until projects are done and all new furniture is delivered. Hoping to install theater stuff next weekend and am aiming to get most things done by end of the month


Then there will be a party!

 

Hell yeah! I’ll be back in town later next week, so leme know if you want help. We can use a write up from here on how to move/install stuff lmao

 

If only there were some amazingly amazing human I could copy!

 

@Nitori

 

Gotcha. I tried to make mine set up in such a way that you could troubleshoot with minimal disassembly. I designed it with "trail repair" in mind. Way less pretty, but way more convenient should there be an issue.

This factory grommet tool, does it pierce things or is it just one of those tools that helps you slide things thru existing holes? The only sour spot in my mind is how I did the pass-thru for the control panel, I wish I could have done it better.

Maybe some weekend you could help me depin the control panel and run it thru an alternate spot... Sometime later this summer?

 

Tundra 65

 

It's designed for piercing and running directly through and the way it pierces, seals the hole right up which is very nice and like I said, super easy. Happy to help so lemme know.

As for the grounds, everything is completely weather tight and all covered in techflex so in my experience, grounds are the last to be an issue so I just keep them out of the way. I also make my own weatherpack connectors as well and recently started using weatherproof heat shrink. So the total complication makes for some pretty tough harnesses and with them all being tucked and very tight, likelihood of failure is slim to none.

 

Praying for y’all bro

 

That's great!

 

Looks good!
Get yourself a set of true flush cutters to cut those zip ties flush. Nothing like reaching in and cutting your hand on a jagged zip tie!

 

Fuck!! There goes camping in part of CO.. this is going to severely fuck FJ summit if these bans are still in place

 

Dig this!!

 

Nice. I'm thinking it might be worth it to get some sort of sealant to go into the harness connector on the switch-pros simply because they do say horizontal installation is a potential water intrusion issue.

That or I have some plexi I could cut and form into a bracket to mount it vertical... For the ultimate in obsessive-compulsive dickery.

 

Could be in for a coral 45.

 

Gallon sized bottle

 

Anyone else get tied up in this mess. 101 and Scottsdale Rd westbound about noon? Closed the 101 at Hayden.

The dark area in front of the wreck is pavement. It shaved all the asphalt up.

 

Happy birthday @Mike330R

 

@Mike330R Happy Birthday man!!!!!