2TR-FE Intake manifold spacer kit! Sold out!

Towing a lot? Just wanting a bit more low end grunt? Then I have what you're looking for! The 2.7 2TR-FE 2" intake manifold spacer kit! Lower the torque curve by 250 rpm with the spacer alone, lower it 1000 rpm by pairing it with a long tube intake and header! And fatten it up between 1500-2000 rpm, and 2500-3000 rpm! The kit comes with the 2" spacer, additional O-ring gasket, new longer bolts, and included shipping in the continental US. PM me to purchase, or if you have any questions. Thanks.

Update 7/26/21:
Sold out!!

Here's a bit of reading on what exactly longer intake runners do. Please take a few minutes and check it out!

http://www.emeraldm3d.com/articles/emr-adj-length-intake/

 

That’s a nice looking product there. I’m very interested. Question: In addition to lowering where the peak torque hits, does it also add torque?

 

Thanks! It doesn't "add" any, but it fattens it up a little between 1500-2000 rpm, and around 3000. You can see the areas pretty well on the Dyno chart above. If you're interested, PM me and we'll things going. Thanks again.

 

Hello, I'm interested in the tooter spacer for the 2.7 if you still have them available. Thank you.

 

I sent you a PM. Let me know if you have any questions please. Thanks.

 

What material did you use?

 

Plastic, like delrin.

 

I still have the tooter version of this that I haven't installed yet.........GLWS. Should be able to sell many of these once word floats around.

 

Just pass smog with spacer I got from tjhall36. I'm a gambler so I left it on getting smog check. Pass visual inspection that's how good the quality is.

 

Awesome! I'm glad to hear it passed! Thanks for the feedback!

 

Can I still get my hands on one of these bad boys??

 

Yes sir you can! I'll PM you for info.

 

Hey, are you still selling these? I just bought another 4 banger

 

Could you shoot me a pm as well. I'm in the market for my 2011

 

I'd like to buy this too. please PM me if you're still selling. but I'm curious if you're able to manufacture a spacers/adapter that allow me to bolt a low boost super charger to the 2TR-FE head. The URL for the super charger im looking to attach is in the link but is for the intake configuration on the 3RZ 4 port intake.

it would be 2TR-FE to 3RZ. The prints for the intake gasket can be found by looking up a replacement for the 3 RZ online

https://www.lceperformance.com/3RZ-2-7L-Low-Boost-Supercharger-Kit-2000-2004-4-Po-p/7015210.htm

 

Hi ... looking for the tooter spacer are you still selling them ?

 

Hello. Unfortunately the spacers have all been sold. I don't have any plans to make more at this time, but if that changes I will update on the site.

You can try posting on my threads, along with Tooters and see if anyone has one for sale. A few guys posted on here that didn't get around to installing them. Good luck!

 

Thanks i will look for it