50+ thread

He did it twice both the coil wire and then at #1 spark plug both times checking for spark

 

Remember breaks for Dad! Take a couple ham and cheese sandwiches, that will stop him!

 

My MSD 7AL2 will jump a spark easily over 3" and produce a very bright white spark and the sound it makes reminds me of a heliarc welder

 

Use to have a dist bench in the school.
Would show ign on every segment.
See bad bushings. Vac advances etc.
Use to go in years later after I graduated and use it to set up my dist.
Funny how the shop was empty and everyone was in the classroom around this machine when I was there and not even thought of the rest of the time.

 

MSD Magneto at 8k rpm !!! , the spark from my 7AL2 Box sounds similar !!

https://youtu.be/XpsN9T-bf7I

 

Yep !!!

The ignition coil I'm running has a heat sink and in very bold bright white letters it says "Caution do not touch"

 

What are you running for gap?

 

.50 right now but might go .55 , don't want to blow the spark out

 

We've had some clouds forming on and off most of the day. Had a little (barely) sprinkle earlier. Right now we're at a 75% chance of a thunderstorm and 90% humidity. This is the part I hate, but not as.bad as I hate the next few hours after a rain when it's evaporating and the humity and heat are stifling.

 

we've got clouds forming towards the NNE and they look like rain clouds !!!

 

We're supposed to just catch the edge of this storm so it was iffy. But I was texting with the guy that works with me during snowbird season and he told me they're supposed to get rain for the next 4 days up in Idaho.

 

TGIS! Good Morning Peeps!
Y’all stay Cameled up in this Heat Today take it easy’ but take it.

 

Calling for rain around here. Hope so. Dry and hot.

 

We might get some tomorrow. The Bermuda High has keep it Hot And Dry here! I think every summer it’s gets a few degrees hotter, and of course we’re a year older. I pace myself and keep at it.

 

Yea
I’ve been doing some diggin at work in the am. Have to find cross connection before recycle water comes to that spot. Too hot after lunch.

 

What’s your compression ratio?

 

Also need to climb under truck and see why brake bleeder keeps leaking. May need to replace and bleed.

 

If you replace it more than likely you won’t need to bleed as it will drip while replacing.
Gravity bleeding is your friend.. lol

 

I made a bleeder bottle. But I’ve noticed my wheel is grimy again. Napa doesn’t open until later and I want to get out on the weed eater early this am.