Triad NC Discussions and Meets

I'm actually from the Burlington area also

 

Not from here had to relocate here

 

I agree!

 

Lol yeah I actually done the same about three years ago. It's a quite area, not much going on here.

 

I'll be in Gboro tomorrow morning helping a fellow members swap his springs in the front. @Blue92

 

That sounds like a blast

 

If it's ok with him another set of hands wouldn't hurt

 

I’ll see what I can do. Thinking about going to Stone Mountain in the morning

 

We are getting started at 9am I get the kiddo tomorrow afternoon for father's day

 

Got it up on stands and sway bar disconnected. Looking forward to tommorrow.

 

Ok so you have a couple choices we can change the springs on the vehicle or off up to you.

 

On is good with me, really doesnt matter. Were gonna do the jack under the LCA method right? Oh and bring a 22 mm and 24mm wrenches with you, I dont have any that size for the cam bolts.

 

I'll see if I can find mine

 

Hope the cam bolts aren’t siezed in there.

 

I have the sockets if you can't find yours but I think a wrench would work better.

I bought an AirCat impact gun just for this job. But it had an alignment not too long ago so I can hope...

 

That might just help lol

 

All you have to do is mark the cams as they sit now so that you can put them back in place

 

Hello all I'm still here so if your ever thinking about a meet let's just do it. This is one of the few threads I monitor. Hope
All are doing well, and keeping those trucks rolling!

 

Y’all get it done or what?

 

Sure did took maybe an hr BS more than anything. Easy peasy lemon squeazy!