Colorado B.S. Thread

Just text him to see how much a six pack of lingling is worth to him.

I'll probably be in your DMs shortly.

 

@thefatkid or Anyone.

What is difference between a "Branded" vs "Salvage" title. Reading it they sound the same to me.

Have a co-worker looking at a SUV with a "branded" Title through a dealership.

 

Never heard of a branded title. Bonded title yes

 

Y'all can try and keep up.

 

make sure you insulate the battery, they were under the rear seat and would sometimes short out on the seat springs and catch the seat on fire....

 

Anybody interested in an older electric typewriter? Everything works and it still has a few ink ribbons with it. As well as the case.

 

Hmm.. That'll be project number1 and 2

 

Sounds like a hipster trap...

 

Brandon is an Electrical Wiz, no worries there.

At least we can just drag the hulk out if its Deja vu all over again

 

Wait, as in "I'm going to fix it" or I am going to test the old mans theory and see if anything catches fire?

 

has he seen it? I'd assume they are calling it branded so it doesn't sound as harsh as salvage.

Had a friend buy something similar and it was a salvage title.

 

So...this is how you fix taco lean!



Jk, had an issue with the arb and my current tire chucks.


But, good news, found these at AutoZone for $3 and they easily and securely connect to shorter valve stems.

 

I've tried that style of chuck and didn't care for them, as they wouldn't securely connect/hold onto the short, metal valve stems I tried it on.

Saw a guy using these (

$13 Haltec H-5265 Standard Bore Lock-On Air Chuck,Gold

https://www.amazon.com/Haltec-H-5265-Standard-Lock-Chuck/dp/B01938M8MW/) at the Yankee Hill clean up day. They looked impressive and held onto the valve stem like a champ:

 

I had some fancy $10/each ones that looked like a small air connector but they hit the rim before they'll push in the valve so i needed to fix that. These might not last for lots of uses, but at $3, they'll work for now.

 

That issue crossed my mine after posting. The old metal valve stems I have are the ones with a regular nut that tightens it to the wheel and they eat up precious space... which may interfere with the air chuck style.

I also recalled the ones of the style you posted that I have were bought at HF, so the quality was probably crap to begin with.

 

Well that was interesting and luckily it was sparse

 

Yikes.

 

Haven’t we heard this story before

 

Just got some hail but so fare only BB and maybe marble size or under.