What Have You Done To Your 3rd Gen Today?

Did you pull the badges and then dip or leave them on? Looking to do something similar.

 

@rgljr831 Did you get the left & right reversed? It looks like the tag on the drivers seat says "Side Airbag" but faces the wrong way

 

I left them on and sprayed them. I couldn't believe how easy it was. I put on like 10 coats, took like 8 hours total since I needed to wait 30 minutes in-between coats then wait 4 hours before you peel the off the excess.

 

Just got my care package in the mail from @mesojdm . It's 110 degrees in the shade right now but tonight when it's cooler I'll install and post before and after pics. Those smoked turn signals are gonna look badass on my red truck.

 

It's going to get hotter than 110 with all those MESO lights!!!

 

Dang, those ethanol-free prices are close to what we pay for regular nasty-gas here in Hawaii.

You'll have to let us know how different the truck feels with the ethanol-free!

 

Yeah. I realized it after I got first one on, but upon inspecting the material there is no difference between either side as far as material and stitching. But I do plan on swapping them after work today. When I first noticed it I was like “slow down dummy” lol! Good eye.

 

Uh... I believe there SHOULD be a difference. That side air bag has to blow out THROUGH the seat cover towards the door.

Someone here mentioned that there's a YouTube video from one of the seat cover makers showing this happen.

 

Have them fade/blend into the rear door and fender which is what they should have done to avoid the enevitable slight color difference

 

A bit more expense on their part but a much better outcome

 

Thanks. Although the seat itself isn’t tagged with the “SRS AIRBAG” I’m gonna swap them out anyway. Better safe than sorry.

 

I had it with the stock stuff, hopefully these will be a little better. Coming home down I-40 fully loaded and warped rotors was it for me. I've had these on other vehicles that were abused when I was younger and always had great results.

 

Whatever, dude.

Maybe a 12 year old will put down his Xbox controller long enough to translate.

Gotta join the rest, man....sorry to say....you'll never be happy with the current outcome.

 

+1. Please let us know what the dealer does to correct this.

 

If you have any weight resting in your bed rails (topper, bed rack, RTT, etc.) and you do any off roading, it is advisable to get the bed stiffeners. Many folks have had the bed sides spread (creates a gap between the bedsides and the tailgate). This can weaken the bed sides and result in cracks, etc. The bed stiffeners are a solid solution and protect against this issue.

 

Added a little something to the lightbar. Pain in the ass to remove and reinstall lightbar but i like it.

 

Lol ....will you???

 

Grow up.

 

Ordered Dirt King Upper and lower control arms. Tired of looking at the super wimpy from end on this truck