TRD Pro & TX Baja OFFICIAL Thread...

A little flexing after work Saturday. New upper arms gained me 2 more inches up the RTI ramp.

 

Nice. Are those 2" x 12"? Do you need wheel spacers with those? BAMF kit? I'm debating between these and the Total Chaos hoops.

 

The are 2x12 Kings with the BAMF towers. On the street I don't need spacers but they will probably rub on full stuff.
I have spacers but I haven't installed them yet. May install them this week/weekend.

 

Getting close to installing my lift, too. Once these 265s are done, I’ll go 3” and 285s.

 

You can run 285s on the stock Baja setup.
I did for awhile and when I put Dakars in I added the ToyTec spring seat spacer.

Probably need a CMC and remove theud flaps. Also I removed the rear fenders due to rubbing at full stuff.

 

How large of a lift are you running now? With the Kings and Dakkars? I have Dobinsons MRRs sitting in my garage right this second.

 

Currently have zero preload on the kings.

Rear is the Dakar heavys so somewhere around 2.75 I think.

 

Anyone looking to sell their OEM spline lug nuts from the TRD beadlock wheels? Looking to buy 12 or all 24 if you have them. Thank you.

 

@oni06 how did adding the Toytec spring perch spacer change the ride/driving characteristics of the truck, did it effect it at all?

 

I didn't notice much of a difference and i didn't bother getting an alignment after adding them.

Now they are sitting in a King box still installed on the old shocks.

 

@greenEFSI thanks for the help. Finally got the new brackets installed without issue. Works perfectly. no more rubbing at full lock. Question though, on the angle of the R/A fitting exiting the shock body, is there a way to adjust that so that the braided line isn't at such an awkward position? And lastly, is there a typical direction to mount the rear resi's, pointed at the rear or at the front?

Thanks again for the help!

 

Arb bumper and 33s don't mix though

 

Well thats a different problem.
Stock bumper worked fine.
Then upgraded to @Pelfreybilt Aluminum Bumper

@Pelfreybilt > ARB

 

Yea yea I want the pelfreybilt hybrid but truck you came with an Arb.. Soon...

 

How so? I have an ARB and there appears to be MORE clearance up front.

 

Really digging these new SEMA wheels on 285’s

 

I have 33s and they rub very bad on the ARB

 

Does your ARB have the fog lights or no fog lights?

 

No fog lights

 

Does the TX stand for Texas?