Camburg Long Travel UCA's +3.5" (Los Angeles)

Fits

$73 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)

2005-2015 2nd Gen Tacomas

$350 for the UCA's - SOLD
$350 for the Axles - SOLD


+3.5in Camburg LT UCA's: I do not have any hardware for them. I am selling them because I decided to stick with my current mid-travel setup. The Ball joints and bushings are in good condition. Great for someone who wants to go long travel and save some money buying slightly used.

Solo Motorsports LT Axles: Axles and CV's are in good shape. One inner CV boot (seen in the upper left of the 1st axle photo) needs replacing.

Location: Near Los Angeles in Palos Verdes, Ca
Feel free to contact me with any questions. 310-897-0276

 

Price for arms?

 

Any pictures of the long travel axels? Also do know whatever happened to the Lower Control arm for this kit? just wondering

 

$450. I didn't realize I originally posted it without the price.

 

I added the photos of the LT axles. As you can see in the photo one of the boots need replacing. I bought these parts used planning to do long travel. I was planning on getting whatever I could find used to save some money then once I was ready do it I would just get the other parts I new. I bought these from a guy who was selling the UCA's because he switched to the heimed uca's. He sold the axles because he never used his 4wd.

 

Maybe this is just me being unfamiliar with LT, but shouldn't there be a part here that goes into the diff?

 

Yep...these are still in the "building" process. Whoever gets these needs to get tulips for the diff to complete them...which is a little odd that those would be missing. Im sure OP has a story about that though.

 

The tulips are there. They are under the boots.

 

PRICE DROP:

$350 for UCA's
$400 fo Axles

 

But they still need to be greased and assembled right?

 

They do still need to be attached to the factory inner spline. Not much work. Much less work than buying new ones for $600 for the axles only, nothing else included. There are plenty of videos on YouTube showing how to swap over your CV's. The outside ends of these are already done. They are already greased.

 

Agreed man it is a deal. If I had funds for them I would pick them up as I could use spares.

 

Wish I had funds for the UCAs. About to cut mine up and it would be nice to have an extra set in case I ultimately ruin mine.

 

Are the axles 4.5 or 3.5 ? Solos axles are 4.5 for their LT kit
TC or Camburg use 3.5

 

They are Solo 3.5". Solo has a 3.5" kit and a 4.5" kit. These were sold Solo's 4WD +3.5" kit.

 

Camburgs are SOLD.
Still have the Axles - $350

 

Axles - SOLD