1st Gen Lunchtable Thread - General Discussion

Vehicles run fine on 85 Octane if you're at higher elevations. That's why places like Colorado and Utah have 85 at most stations and places like California don't.

 

Yeah im from California so e85 in a non ffv car will run like shit

 

Making me feel like I was going insane

 

E85 eats seals and requires more (as a volume) fuel to produce the same bang however it is a higher octane rating. Closer to 104 octane. Because there is less density, it will lower your MPG. It is sometimes cheaper so that may offset the cost.

You can always do a Mix in a non E85 certified system (Popular in the high Boost BMW World) called an e30 mix. 70% tank filled with 91/93 & 30% of the tank filled with pump E85.

These trucks are already very sensitive to fuel so even 30% may be too much.

 

The more you know

 

Best way to repair some small rust holes in the firewall or that cab?

 

Cut it out and weld in new panels

 

Well fuck me then huh

 

Yeah where to grab the pannels tho..

 

Just thin sheet metal or cut out sections from a junk yard tacoma

 

Might as well tube for 35s haha

 

It’s fairly close to that area.... its right below the ac drip behind the exhaust shielding

 

I mean if the hole is tiny you might be able to drill it out and fill it with some welding stick and call it good

 

So do you believe the moon landing was fake and aliens are real?

 

Unfortunately its a couple golf sized holes I’ll need to add some new metal

 

I would never put E85 in my Tacoma, it even hates E10.

 

What about flat earth theroy? Lol

 

I just scrolled through it, the totaled thing set off an alarm but he said he had pictures of before and after so I figured a guy could just go from there.

Oh well, not in the market anyway haha.

Sssssssh

 

What if you were always broke and liked to drive?

 

Oh yeah you gunna have to cut in weld. Try following a body line and goto a junk yard and cut out a new peice following that same line