Colorado B.S. Thread

Yeah I have 600 right now but as I add more armor I was going to go that route.

 

I am, definitely different but feels better. Just pay attention a bit more on curves. Running Kings with 650lb springs

 

I’m going to take mine off Saturday and test it out.

 

Ok I’ll ask them and see. I am bringing it down from Wyoming. I just don’t like quality of work from the dealers are at that I’m close too.

 

I DD my truck and have the sway bar off.
Kings with 650#

 

I have fox 2.5 ext with 600lb kinda soft but ride is nice.

 

I am a Yuengling virgin no more. Never heard of Yuengling until reading about it here a few days ago. Noticed it on the menu while in Jacksonville, NC. I liked it. Goes well with unagi and hamachi sushi.

 

Being some back! It’s been a few years since I’ve had any.

 

I’ll call them in the am and see if they can get them. Thank you for the suggestion.

 

Yep Icons with 650#

 

Just wait until @2016spicytaco rolls through...talk about interesting.

 

v

Look about right?

 

yes but......

 

I ditched the sway bar, 650# on FOX. I took them off my 1991 when I bought it and ran without them for 15+ years and lived to tell the tale.

 

Sway bar delete mod completed in 2009. Never looked back. Sway bar went to scrap years ago.

 

What weight do you have up front?

 

Also took my sway bar off after installing kings running 650lb have 700lbs springs i want to swap, but havent had the chance to change them out.

 

I'm not sure I would run without a sway bar on stock springs and shocks. The higher spring rate and better shocks definitely firm up. Even though it does get body lean it doesn't feel uncontrollable.

 

The squirrelly feeling could be caused by alignment just as easily as the spring rate on your shocks. Any idea what your caster numbers are?