Got new springs

I ordered new OME Springs from Toytec to give my 07 access cab a little more lift in the front i already have a leveling spacer in the front and a add-a-leaf in the back but the back sits a little higher and i want it level so pretty excited! ill post pics wen i get it done!

 

What spring strut combo did you go with?

 

i just got the OME standard load range springs

 

Is the leveling kit you have a preload coil spacer? If so I'm not so sure it's a good idea to run that in conjunction with the OME springs.

 

OME springs wont work with factory shocks. and unless the spacers you already have are only 1/4 - 1/2" you can use those either

 

Cool.

 

wait? are you telling me i can't run my new springs with my Pro Comp leveling kit?

 

I asked if the leveling kit was a preload spacer or a top plate spacer. If it's a preload spacer, then I don't think you should. That's stacking lifts.

Also, Keason is saying your stock struts aren't made to work with the OME springs. You should get OME struts too.

 

also I just thought of this on the way to work. There's no way that your stock shocks would be able to accommodate the lift that the springs and spacers would give you combined. you would be topping out the shocks regularly.