Waypoint RTTs, OP updated 6/7

Being 5'5" with a lifted truck makes it take a bit longer to put the tent away. I will be bringing a 3 step ladder on my trips

 

If it were centered, how would it measure up to the bed width? I'll be putting mine on an Alu Cab Explorer Canopy and it's narrower than the bed itself by a couple inches on each side. Looks awesome, how do you like the interior?

 

Thanks! A car in the way, but here you go. The tent is mounted offset to the driver side by an inch due to interference with the awning mount. It was a compromise because I wanted the awning as tucked in as possible.

 

I sent him here as I know a couple of you are pulling tents off when you are getting your new tents from Chandler, I don’t know if you’ve sold your old ones yet but if not, here’s a cash in hand buyer.

 

with the large in hand, can you give dimensions of the shell width/length?

 

Bed measured from the inner rail trim in the middle of the bed is ~4’ 9 1/4”.~4’ 6” width on tent exterior measured on the bottom of the tent shell. The top of the shell overhangs the bottom by ~1inch so say 2 inches wider on the top.

Interior is great! I like all the pockets and it has a couple hooks for clothes/hats/light. Hard to tell if it feels any bigger/smaller inside then my CVT mt. Shasta, I’ll have to sleep in it with the man to find out. The sheet on the mattress is removable, it does smell heavily of something used during manufacturing so I’m airing it out and washed the sheet.

Couple closed pics

 

See post above for width. I’ll have to get you a length later as I’m not near my truck but it’s ~6’8” if I remember correctly

 

Awesome, that's probably about the exact same width as my cap! I can't wait to get that mounted and check it out!! Thanks!

 

Great meeting you @ChandlerDOOM and safe travels
No more sleeping in the ground for me

 

That visually looks much larger, but when I look at the truck it looks like it takes up the same space as mine.

Do we have dimensions comparison? Maybe I missed it.

 

It came! It was fun talking to chandler for awhile! Thanks again man the buying experience was amazing!

 

I like the new side vents, but @ChandlerDOOM what's up with all the extra webbing. The 1st Gens close and hold fine so far. I still haven't added by toggle clips but 1 cinch strap on each corner is secure.

 

Yeah, dimensions are in the middle of the thread somewhere. I’ll try to dig em up but I think it’s 5 inches wider and the same length/height
Edit: Dimensions are on his website coevehiclesolutions.com. It is 5 inches wider inside

 

Still haven't gotten to camp in it yet but decided to pop it open while off roading this weekend to get a couple of pics.

 

Thanks! Looks great!

 

How'd it do up on the cab like that? With the overhang a little on the windshield did it not catch much wind?

 

Curious about that as well.


@ChandlerDOOM do you have a hashtag for the tents? Gonna start one for you #waypointRTT

 

Speaking of...



High elevation certified. That was ~11k, night temps likely in the 30s before regular 20-40mph winds. I am amazed at how insulated the fabric is... keeps it warm inside even though its cold outside.

 

I might be right there with you ! I might need to price one then get mine up forsale!