HELP with atx artillery

I have searched and still no clear answer!

Just ordered Billy 5100's for the front and a AAL for the back. No TSB on the rear(out of warranty)
I want to run ATX Artillery 16x9 with 285/75/16 terra grapplers
Center Bore108 mm
Offset-12 mm
Back Spacing4.53 inch

Im I going to have issues with this HELP
I have already removed the mud flaps and I think Im going to have to do some trimming

 

bump for help

 

what are you worried about?

 

With a 16x9 wheel and a-12 offset I have a feeling there going to rub like hell

I just want some more info before I drop some Benjis on a set

 

yea they will with 285's... mine are set back like that and i had to trim quite a bit to prevent rubbing... ofcourse i trimmed enough that i can fully stuff them and turn lock to lock w no rubbing

 

i have the same rims... i had them put 285/75/16 bfg km2's on.. they rubbed.. and i trimmed for my old tires... so i went to 265/75/16...so the answer to your questions is yes you will still rub..

 

I guess im going to go with the 265's like I wanted in the first place.

Thanks guys

BTW, menametony- I live 25min from deals gap. I saw ur pics. We meet up there quite often and ride. Heres my toy

 

just trim...I'm running the same rims. No probs and you'll be happy

 

What all did u have to trim. I dont mind trimming, i just dont want to trim the whole dam fender well out.

 

Did you end up buying these? They rub on your calipers at all or were you good to go?

 

These wheels would clear the calipers then right?

 

Nevermind. According to discount/americas tire American Racing has continued this wheel, or at least the 16" wheel.

 

Any problems with calipers?

 

Bump on calipers

 

what about if you had the 3' toytec lift? would they rub then with this set up?

 

I have 285/75/16 on the Toytec lift and have no problems with calipers.

However I did need to trim and do a cab mount chop. You can buy plates for the chop from BAMF on this site. They work perfect and I have ZERO rubbing now.