Custom Switch Panels

While i'm not familiar with the switch pro myself, I do believe there are several models. It will all depend on how it mounts based on the model, tabs vs screws, if i'm not mistaken.

As for the "auto light" switch, i'm not familiar with it, but it's easy to check. Basically, is it the same size as the inverter switch? If it is, then any of @mesojdm's options will work so your only concern will be to confirm the switch pro model.

 

Thanks. Yea. I just edited it for the 9100 and the auto high beam switch (2018 safety stuff) It's the same size as the inverter. So it does look like the CPSP will work for me. When it's back in stock anyway. Lol.

 

Keep your e-mail notifications for the thread on and keep a tab open on page 1 of the thread then just refresh it every waking minute!

Thats how I got all my ME-SO Customs products! What's more important, sleep or quality products for your Taco?

 

How are people modifying the ch4x4 switches to fit?

 

I do no have my switches yet.

Is @mesojdm confused? Or is it me?

What modification is needed??

 

My understanding is that the Toyota switches and ch4x4 switches are slightly different. Meso designed the holes to work with either, but it appears the ch4x4 are slightly taller where they clip into the hole. Just trying to figure out what to do.

That is, unless I bought a different ch4x4 switch than intended

 

These are the 3 most common switch sizes:

LEFT: TOYOTA SMALL PUSH BUTTON
CENTER: TOYOTA TALL PUSH BUTTON
RIGHT: CARLING ROCKER SWITCH





99% of my panels use the SMALL PUSH BUTTON TOYOTA. ALL OEM switches will fit this hole(example; QI, USB, Power inverter, traction, etc) All CH4X4 "SMALL BUTTON Series" will fit as well. Seen here:
http://www.ch4x4.com/product-category/push-series/toyota-small-push-switches/


The middle Button is more common in the 2nd Gen Toyota, I make a few panels to accept that size. This is the Tall Toyota button.
CH4X4 series:
http://www.ch4x4.com/product-category/push-series/toyota-push-switches/


The last button I don't have anything designed for. They are very common for DIY, and are universal/available at most auto parts stores.

Hope this clears it up

 

Thanks. It appears I have the regular sized push buttons, where I need the small size

 

@mesojdm PMed you to purchase one of these if you have any more available

 

Those have been sold sorry

 

Nice Rocker Switch!

 

I’m not sure if you have a list of any kind but when you make more of this style I’d love to buy one!

 

Mesojdm, please check your messages. I just ordered a 6 switch plus cab light cubby panel but I need the bottom right switch hole to be the tall size for my clutch start cancel switch.

 

Got excited when I saw the pay now button option working for the CPSPW!

But womp womp.....

 

sorry..
I need a better way to show live inventory. Going back and re-editing each OP to reflect current stock is time consuming, and sometimes I forget to.

 

Mesojdm, pretty please check your messages.

 

Pm’d

 

Happen to me too. I kept goin back thinking it was gonna be there

 

2nd Gens could certainly use some center panel love and since its not flat(plane changes between the 4 switch locations and the two 12v sockets) its better suited to 3D printing than a flat backed switch panel or diy solution. Pictures show it angling down as well but I think thats due to the perspective created by the plane change (a flat panel front would stay even across the top and have a bevel on the back plane. I could do a blank template including the beveled back, its ~8" end to end.

 

Just received @mesojdm ‘s custom “custom” cubby panel today! Quality is top notch. Looks just like OEM. Little problem with the blank switches though as the outer blank switches can’t clip into the panel when everythings all installed and put back together.







I guess imma just have to trim the insides to make them fit. I won’t be needing those inside slots no more anyway
OVERALL great product, thanks