TTC ☆ OFFICIAL

Scrambled eggs, cheddar cheese, hash browns, pork sausage, bacon, with a maple syrup drizzle.

 

Also, it’s an 05 Saturn ion. Not sure you could pay me to take this vehicle

 

Slapping a coat of wax on the Tundy, figuring out my Garmin Zumo 550, (which was hosed on a little scoot run yesterday), laying low.

 

all that Cholesterol

 

I'm eating pizza rolls watching Netflix and relaxing. Probably go to Home Depot later to look for a new grill.

 

This is the best response so far. If I had a trophy, it’d be yours

 

Doing the RAM mounts A-pillar mod today! I got the wrong M6x50mm screws though...need to get a cap head screw instead of a 10mm bolt because the socket doesn't fit inside the little 1" ball mount hopefully Home depot has the cap head size needed because lowes did not have that size.


Also going to stalk @MattCowsmasher new bumper as he leaves @Texoma CCC shop

 

I was thinking the same thing Is the car going to get fixed or scrapped? You can use a slide hammer with a coarse sheet metal screw welded to the end of it. Screw the screw in where the key goes and give it some good whacks. Try to get it within the first couple because the screw will pull out. We had to do this at the dealership when customers lost their keys. If the vehicle is going to be driven again, you'll have to rebuild the cylinder.

If you just need to turn the wheels and don't want to go through that trouble, you should be able to separate the steering column under the dash and just move the wheels by hand. Or use a jack to move the front end around.

 

Pepboys has them at least down here they do

 

Want a vertical cabinet propane smoker?

https://www.basspro.com/shop/en/masterbuilt-sportsman-elite-40-extra-wide-two-door-propane-smoker

Upgraded the supply line to a needle valve for better control.

Or are you looking for a grill grill

 

Need a grill grill. I have an electric vertical smoker I really like already but my grill is falling apart. Everything the flood waters touched in Harvey has been reacting badly and unfortunately for my grill the legs have basically rusted off and the box itself the bottom is rusting out.

 

All finished @Texoma an @T4Rgurl thanks a million great work super happy with it.

 

Came out awesome!!!

 

Thanks much kind sir means lot!! Chris did the best on it!!

 

@ChadsPride I'm debating on ordering the morimoto fogs...how bright would you say they are? The fogs I have now are about 8000 lumens and the morimotos are rated at 2400. But they have that nice cut off.

 

We bought a stainless steel natural gas Weber a few weeks ago; we decided on stainless steel to avoid exactly what you just described.

 

I'm sure that would have helped but may not have stopped it completely. It ate the paint off our fence and bleached the brick to a different color on the house. The chemicals in that water were nuts.

 

I really like mine but if you have plans to go with a new front bumper at some point they may not fit.

The Rigid SAE pods are rated much higher but would require a bracket for the stock bumper

I saw a really nice setup here this morning

https://www.tacomaworld.com/threads...-fog-light-review.554813/page-4#post-18151061

 

Lol yeah I can imagine. A lesser known consequence of Harvey: cancer from the flood waters.