What Have You Done To Your 3rd Gen Today?

The thought crossed my mind.... It's a funny world out there !

 

What kind of difference did it make to the sound quality and output? Are you still using the stock speakers? And where did you mount the amp? Thanks!

 

I saw somewhere on here many posts back somebody had mounted it on the backside of the armrest console but on the inside (if that makes sense) then drilled a hole and mounted the connector for the mic on the inside of the console. The only thing visible was the mic and it could be disconnected and stowed behind the seat.

 

One of the best mods I've done to my truck yet. Much improved shifting.

 

thats actually a great idea....if i decide to hard mount it, i might do that!

 

Mounted the James Baroud, built a drawer, mounted the fridge slide. Almost completely done with transferring the 2nd gen parts to the 3rd gen. Its also at the dealer getting the transmission evaluated. Experiencing grinding shifting from 2nd to 3rd in 4lo.

 

Kicker KSC 6x9 and the 6 & 3/4. Crutchfield is/was having a buy one get one half off and they include the speaker and wire adapters.

 

Suggestions?

Seems to be the weld.

I've kept it clean and protected during the winter, but it seems inevitable.

 

Lookin' good! Glad you're enjoying them

-Bailey, Baja Designs
www.bajadesigns.com

 

Ditto

 

Installed 2018 TRD Pro Grille....

 

Where did you get these?

 

Stock wheels 275/70/17 Cooper st with 1” bora spacer

 

Over the last few months added: TRD pro Grill. Method Wheels. Kicker tweeters, replaced all 4 door speakers with kicker. Cali raised 32" dual row light bar and Revolver X4 Tonneau cover.

 

If you have your warranty still, take it in

 

Sound Dampening & Sound Deadening

Noico Black 80 Mil Dampening and Ensolite IUO Peel and Stick Sound Deadening of a Superior High Frequency Acoustical and Thermal Barrier in the Tailgate























I know they say not to do the whole tailgate because of the added weight and the possibility of ruining the slow lowering portion of the tailgate, but I couldn’t just do half the job and leave it. It would have bothered me. So I ended up doing the whole tailgate and the added weight isn’t really that bad. It still lowers slowly, but I’m sure over time I will be able to notice a difference. I guess I will just have to help assist the tailgate so that it doesn’t get ruined. However, it was well worth it. I first did just the section around the tailgate lock. Although I could tell a difference, it wasn’t as quiet as I was hoping for it to be. Now, it is perfect. It has a bit of sound still, but nowhere close to how loud it was in the beginning. It’s so nice. I wish I took a video of the before and after. However, when you are standing by the Driver’s Door or the Passenger’s Door and you use the Smart Handle to Lock or Unlock the truck, you cannot here the tailgate over the regular locking and unlocking system anymore. It blends in right with everything else. Here is a video of me standing right next to the tailgate when I unlock and lock the tailgate.

https://youtu.be/wJcDt7tE6tI

 

Sweet gear.

I like the charger cord & the adaptor port.

I hear ya on the need for readers. I get caught every time my wife and I go out somewhere to eat. Menu's kill me.

I've been getting great use out of the magnifier app on my iPhone 7+, though. You simply triple tap the home button and the reading app pops up immediately....zooms with ease. Outstanding feature. You simply have to go into settings to enable it.....then you only need to triple tap to open it.

That's hilarious !!!!

 

Tinted windows today. Looks more complete with the factory black stickers on the pillars.

 

My dealer ordered them for me, you can get them off of their website, but’s it’s more expensive. I payed $310 for front and rear I think off of their website it’s like $400 something
They’re made to custom fit as well so they make them when you order them

 

anyone here dechromed their 2018 non-pro grille yet?