Installation question on OEM rack....

Probably a dumb question but got to ask...

The T25 torx driver needed? Is that a socket or screw driver type?? those who have installed them, did u use a socket wrench or screw driver type...??

driver may be the key word but have to ask.... I did read the instructions...

Thanks

 

I dont understand the question? What are you trying to do?

 

Torx is a star like wrench similar to an allen wrench. What exactly are you installing

 

I would use a rachect with an extension if needed.

 

They come in sockets like these:


or bits like these:


When i installed mine, i used the Torx bits for screwdriver. You should be able to buy a kit for ~$10 or less at any local Auto parts or even Wal Mart...

 

So you didn't use a rachet? Just screw driver??

I am installing the OEM roof rack, sorry that wasn't clear...

 

For these particular screws, i used the Screwdriver..

You could use a ratchet with an extension if you want to go that route..

 

they also come in T handles