1st Gen Lunchtable Thread - General Discussion

It’s not that hard. As long as it’s 12v and you have a 12v independent light strip all it should be is a matter of hooking it up.

Making it work with the door sensor is another story.

Come get it! It’s at the Pick-n-Pull in Stockton, CA.

I checked the whole cab. It’s perfect, no damage at all. Besides the cut radiator support, which you’ll see on all these trucks.

 

Digging the look. Think I’m going to keep it to confuse the hell out of people.



It came in handy yesterday when I went to the Capital Building in Sacramento.

 

Who am I kidding

Police Interceptors have to be fast. If this was a police car then they would have to have low speed pursuits.

I win if they decide to go off-road though.

Oh wait. The freakin’ Manual Hubs...

 

Yea you’d have to get all the cob webs out too.

 

I guess even SDHQ needs to go to AutoZone ever once in a while

 

Some of the beauties we pulled horns from today.

I understand why they used to use “Cadillac” as an adjective to describe something expensive, and luxurious. Because these cars were it. Beds as seats, leather everywhere, power windows, power seats, premium audio, big v8 engine. They fell off in about 1995.

This is the Cadillac I took the grille from. I wanted to take the whole front clip with the bumper and headlights, but I didn’t have a Sawzall. Had an elaborate plan of wiring the headlights to work and hanging it on my wall.



Some of these are Buicks, I know.

 

You should cut the whole front off and make a giant bbq pit

 

Wut

 

You heard me. Cadillac bbq pit

 

I want to buy a tanker truck and turn it into a giant smoker

 

@BartMaster1234 this but a Cadillac

 

Is it just me or is that a gray dash with tan door panels?

 

Getting there...

 

95-99 grey with 00-04 grey

 

What about the old bed from the 5 lug? Could make a hell of a pit out of that one. Talk about a huge spit roast...

 

Looks like it grew there.

 

Your suspicions are correct. Those are 2001-2004 Gray Double Cab Door Panels. I put them in when I converted the doors from crank windows, manual locks, and manual mirrors to all power.

I made my own custom retrofit harness to adapt to the OEM door harnesses. I used to produce sell them but I got more interest out of the Caddy horns.

https://www.tacomaworld.com/threads...ofit-conversion-build-thread-write-up.455447/

 

I'm starting to wonder if you guys were redneck's in another life.

 

It’s getting cut up and thrown away. I just saved the bed sides from it.