What Have You Done To Your 2nd Gen Tacoma Today?

I just used 3 short course threaded screws. If you wanted to remove panel you could bolt. Since I plan on very little if any use (fingers crossed) it should hold fine... pretty sturdy.

 

3" Toytec and SBC UCA's. 18" Fuels and Nittos.

 

3rd Gen coils are a lot more stiff.

 

Top is already off the truck and on its way back to Amazon. Did not like the fit and there is to much movement and wind noise going down the highway.

 

thanks buddy!

 

Installed a 1" spacer lift! Relax, it's for my seats. Seat position feels great now.

 

Nice. What material are the spacers made from? Im using 1.25" thick nylon bushings with grade 10.9 bolts. A member here questioned their safety and recommended Aluminum. Not totally convinced it will be any safer though.

Big improvement in comfort..

 

Something easy, but it gave me a sense of accomplishment for the morning...TRD Grill emblem.

 

Daytime pics of the KC G4’s

 

What did you use to trim? Nice clean lines!

 

Is it that noticeable?? Front and rear or just the rear like in the pic??

 

I'd love to see some night shots, thinking of replacing my Morimotos with something amber colored

 

Huge improvement in comfort and visibility. Love it. The spacers are made from ABS hard plastic. I suppose some kind of metal would be a little safer, but there aren't any spacers for the front of the seat so it's not like the entire seat is sitting on spacers. I'll have to rely on my "spider sense" for watching out for other drivers.

 

Very noticeable for me. Feels like when I lifted my truck.

 

Just might give this a try. Got all the materials at work too!

Just might give this a try. Got all the materials at work to do it!

 

You going to just do the rear of the seat or front and rear?

 

@olecoot in the end it was about $1400 including paint.
But that’s because the TRD Pro grill alone was $375. I was able to make a lot of that money back though by selling the old parts. I bought 90% of everything off eBay.

 

@boogie3478 i did the same thing right after buying my truck! It just sat too low and there’s no height ajustment on the seats

 

Had a rear wheel seal leaking on axle. Changed it and did the rearbrakes while I was at it. Also changed differential fluid. 91,800 miles on the taco