South Carolina BS thread under new MANAGEMENT and lives in SC

@ahspurlock I've got the leafs in the truck but plans changed. Not sure I’m headed up that way today...but when I do, I’ll get with you to drop them off.

 

sounds good

 

I got it, I think. I was using the C end of the wrench that wraps around the coil and that takes some leverage away it seems. It took forever to adjust them yesterday like this but I just adjusted them just now and it took 5 minutes.

 

I use a jack under the cross member- and spray a bit of silicone spray on a cloth and wipe the threads.
Also, Wear thick leather gloves with the spaner wrench- makes it much easier.

 

Just got the second side done since my last post. That quick. Idk why I was fighting them yesterday.

Now I'm at 1.75" of threads on driver, and 1.5" on passenger

 

The ICON 2.5 extended travel with the coils that come with the shocks. 650#?

I'm at
24" fr
24 fl
26 rl
27 rr

That's on 1/4 tank of fuel.

 

I'm so repetitive.

Leaving it here I think. 24, 24, 26, and 27 hub to fenders.

1.5" threads on right.
1.75" threads on left.

How does those boots look to y'all? I read somewhere else stock height is about 20-20.5" which would out me over 3".

 

not to bad let it settle for a few days

 

Anybody interested in a 30-lot of patches? Holler, $125 obo for the lot

 

Haven’t down here. Shot a pile of carp up north on the river when I was younger. Seems the sport is growing though.

 

https://www.tacomaworld.com/threads/stidertrax-1-25”-wheel-spacers.558726/#post-18248653

Great deal on 4 spidertrax

 

Like @scottalot and @ahspurlock said- let the suspension settle. Flex it out. If it does not settle- may need to reduce the lift some. your truck is much lighter than others... The CV angles as shown are high. New lifts always settle though.

 

One of my little cousin's husbands, and a long time fire-ems member, has recently been diagnosed with cancer. A bunch of us are putting together a fundraiser for him on August 25 including a softball tournament and car show. I'll find out if there will be a truck category if any of you OLAF trucks are interested in entering..

 

Yeah that's the chassis code it's still a 240sx not the 240z cars.

 

This is also my co-worker and one of my best friends.. I keep forgetting that you are family with Bubba.. he knows so many people

 

Been wearing the spots out on Lake Greenwood offshore. Dink fest so far with no big ones but I kinda figured that would be the case with the heat and extreme water temps. The ol taco pulls the boat nice. Prolly once we buy a house and I have a garage I’m gunna fix the rear end sag. It’s not bad but enough to notice. Can’t wait for cooler water temps and the fall bite!

 

Looks like mine! Each truck stock height is going to be a little different depending on the age mileage etc.

 

In for the SOS and the flags. Who would want your OB member badge

Do you have a serious buyer for the truck yet?

 

I finally got rid of my collection of them except this one 92 coupe SE. It's got a 5 lug swap and Skyline/300zxTT brakes all the suspension is done. Stock motor except some minor things built it more for auto-x than anything and don't need a whole lot of power to go 100ft at a time. I probably have close to 10g in the suspension of that car. I had 5 at one point all s13s I did some crazy hoonigan shit to them to make them different from all the sr20 or RB swapped ones.

 

Y

Yep