What Have You Done To Your 3rd Gen Today?

Me too.

 

I've been thinking of buying one of these to replace my cig lighter, what do you all think?

https://www.ebay.com/itm/12V-24V-Ca...m=302779078874&_trksid=p2047675.c100005.m1851

 

I. Have those.. So. Far they are great

 

What do you mean you be at the ears? Pics?

 

These...

 

My DIY molle panel for less than $75. It was more labor intensive and required more problem solving than I anticipated, but it was totally worth it in the end. It looks good, it's solid, and fits my needs really well. Here's a link to my write up on my build page.

Norsemanvike's DIY plastic peg board molle panel.

Yes, that's camera gear on the right in the foreground. The whole point of this was to get that gear back there and out of sight in a location so that I would never forget them at home. I'll use the under storage area for lighting equipment.

 

Dog put in the first scratches, 2400km. He wanted in the back!!!

 

Gotcha. So you just bent them a little. Didn’t remove them. My plan is to cut them straight across so they are flush with the crossmembers.

 

Well, faithful companionship does have it's price. Sorry about the scratches, but your pooch is probably worth it and you get a fun story to tell out of it the rest of your life.

 

Excellent day!

 

Installed my Faux TRD Pro Headlights and Taillights by Depo. Pretty happy with the fit and finish. I did have to cut the harness for the DRL's but i'm comfortable with soldering wires etc so it was not a big deal. Rears were plug and play.

 

That was my plan also. Had the sawsall out n all. 3lb hammer. Couple wacks they bend out and up very easily without any cracking.

 

Don't know what size boat you are towing or what size engine, but my '18 Pro V6 only gets about 15mpg towing my 2010 18' Four Winns I.O. Not bad.

 

I run Icons but I also do a 50/50 mix of RainX and regular washer fluid. At highway speeds I don't need the wipers. The bugs out here in the country however are still too beefy. I still have to use squeegee and windex in the morning before I leave for work. They make a bug windshield washer fluid I may try adding to the mix.

 

This one requires removing the panel to thread the nut on the back. The Blue Sea snaps in without removing the panel.

 

I like that. How much both?

 

Made mounts for my traction boards and hi lift. Reorganized my bed which got me thinking about drawers and a platform.

 

How do you order a gasshole?

 

Go here:
Edit- you need a 2nd Gen I believe. Here:

https://www.tacomaworld.com/threads/the-gasshole™-2nd-gen-fuel-cap-holder.550925/

This is the link for the 3rd Gen version.

https://www.tacomaworld.com/threads/the-gasshole™-fuel-cap-holder.534459/

Be ready when they are!

 

The grille was $100 and the garnish was $50, both purchased on eBay