Long Travel BS Thread

so the shop for got to top off my brake fluid when they installed the new brake lines

 

@2002 tacoma s/c LT and @Tacomoto23 are in your area too!

 

Im down to meet up for beers or something. I wish there were some local trails we could go run...

 

When my truck is back from solo I'll be down to meet up.im in Carson. Local trails are like a hourish. No traffic. But it California. There's always traffic.

 

Fuel cell is almost resting in its home...few more tubes in...PROGRESS!!!

 

Cool sounds good. Ive been out to solo and talked to them. Curious to hear what you think about their kit.

And yea, so very true about traffic...

 

good to know. thanks

 

I've read start high and bleed out until you are happy with it. Set that oring at the top of the shaft. So you could start at 150 and go down.

 

Check out @theduhtchman on Instagram - he's on here as @dirt addiction he has the solo 2nd gen xlt kit.

 

When I can afford the rear suspension I will be going a similar route.

 

Take the tank and play around if you can. The factory set 200 should be too high. I'm running about 110psi of air since I don't have access to nitrogen yet and it's pretty good. But still could use a proper tuning session with people that know more than me

 

What size rear bumps and what type of suspension setup? How much up travel do you have at ride height?

 

got the u-bolt plates in installing them today

 

I really like still having my full bed for dirt bikes and camping. That was the main reason I went this route instead of bed cage.

 

With 8" of up travel you would benefit from being a 2-3" stroke. At 2" stroke I would run 75-100 is it's a 2" diameter bump

 

Yea with only 8 up I'd shorten em to 2" and run bout 100 in em, that's what I ran in my old leaf spring setup...maybe a lil higher pressure like 150 cause I'd drive it pretty hard.

 

Speaking of bumps got mine located and tacked on today and the swaybar links figured out...there about 3/4" of clearance between the swaybar arm and bumpstop lol. And got my fuel cell feet and crossmember bent up and in... soo hard to stay motivated in the heat here...was 108 today

 

But where will you put the blocks for more lift? Asking for a friend, he was wondering if you could fit 33s on that.