Stock Amplifier

I have an 09 Tacoma With a Factory Amplifier in the back, you know the one it looks like an ugly space ship, I bought a new headunit sterio, Where is the wires I need to splice to make the amp work and is there a harness kit available for the amp? thanks.

 

well i just went through this. if you have the JBL audio system in your taco like a did then you will need a harness to install your new head unit. here is what you need... http://www.crutchfield.com/p_127TAT...h=PAC+TATO+Toyota+JBL+Interface&ssi=0&tp=3486

 

Don't mean to threadjack or anything but I'm about to do an install of amps/sub/front speakers in about 2 weeks and will be removing my PAC TATO if you're interested in taking it off my hands for 50 shipped. I've had it installed for about 5 months, (since January). If not, I'll just do a b/s/t thread .

 

No JBL just the stock amp

 

Can you post pictures? There isn't a stock amplifier in the back of the truck that I know of. I can say this because I stripped the entire car down to bare metal.

 

Not stock but Factory I guess, it says no where that it is JBL it should be labeled on the speakers/Front of the old sterio correct?

 

How about you snap a picture of this thing.

 

there is no external amp in a non-jbl stock setup

 

k After looking through some stuff it may be aftermarket install sorry fella's

 

Score. Sub amp or what? Get us a model number and specs and maybe we can throw something on it and get some better sound for you.