Great White Taco build

By the time i can afford one, they will probably have a 4th (or 5th) gen out

 

I miss mine everytime I get in my crappy car

 

@DOUBLLD was able to adjust the new coilover in 4 minutes! Im headed home to install it again.

Thanks Danny for your hard work through this whole process! Sorry your eyes took the hit the last time.

 

Round 2.

 

Looks like you got the gusseted spindle installed

 

Yes. Finally got another inner spindle seal.

About to put the wheel on and go on a test drive. Im glad to be back in truck and sitting higher than the ground

 

I see a jack stand at 9 o’clock.

Good for you, son.

 

Always jack stand, and some pressure on floor jack

 

Im back!!





Alignment tomorrow

 

no need, looks fine

 

Steering wheel is crooked, and the alignment was for the other height on the coilover, before i adjusted them

 

Atta boy

 

bit h

 

bitch, lol. although lately i have used jack stands on the truck. i dont quite trust the jack ive had to use

 

Did you ever do a remote air connection for your ARB compressor? I'm not sure on what parts to order to make it happen.

 

Im not sure I understand remote air connection. I do have another quick disconnect in a rear cubby, but I never use it

 

Do you remember what parts you used for the quick disconnect in the rear cubby?
Is your ARB the single or dual?

 

I can get a parts list later today. I actually probably have some spare stuff if you want it. I believe i used 3/8" air line and 1/4" NPT ports for the other stuff.

I have a dual

 

I appreciate it. I made a parts list using ARBs stuff and it came out pretty expensive.