Volk racing TE 37 on my tacoma

That's how you use them Volks. All these parking lot pix make me want to puke

 

I just got my hub rings in from the eBay link - They also came in a light gray/ cement color

 

What size Te37 doesn't rub on stock height Tacoma with what tires?

Thanks

 

Too broad of a question. Stock height and stock tires: 16" & 17" is best.

 

16x8 et0 with a 265/75/16 would be the best bet.

 

Offset and back space plays into what will and won't run.

 

Would 17x6.5 +38 rub?

I like the 17" te37sb concave rather than flat

 

6.5" wide and +38 probably won't clear your calipers.

 

Yep just painted mines. Primer then paint all gravy

 

I just tried mine they don’t fit Inside the wheels

 

It’s tight... you have to mount the spacers on rims then mount on the car. Use lugs to make them fit

 

normally they are tight or a little loose, but this is bigger than the inside of the wheel

*** used a book to push equally - it was a very very tight fit. I think it may make hub too tight. Looks a little deformed.I might get a set a custom ones made

 

Has anybody measured the center bore? I am waiting for my wheels. I know it supposed to be 112mm but it sounds like that may be tight. I think I am going to just to get some rings custom made. Cost $60 but at least they will fit better and are black.

eta, nevermind I saw the previous post. I will probably wait to get mine and measure. Just waiting for the dealer to ship them.

 

Yes I want to remeasure and order - plus I would rather black -

 

Hi Friends

 

Ballleerr!!

 

Now that’s a good color combo, looks amazing man.

 

Has anyone had a balance issue with these rims? Some of my wheels required 20oz, some 7oz in order to be balanced. The shop even broke the beads and swapped tires around with other rims in order to see if it would make them better. I've heard that K02s are a little harder to balance than most.

 

Same issue here. I hammered mine into the wheel slowly and had to be really careful when mounting the wheel evenly. I ruined a few rings by not putting even pressure when mounting the wheel on the hub. I got another set and plan on sanding the ring a little to fit easier. I'm thinking the paint on the volks is thick and messes with the bore.

 

I requested black and got grey...I have a total of 12 rings at this point cause I keep getting grey.