Backspacing and Offset question

I need some advice and struggle with this concept.

Looking at the Pro Comp 05 Torq for my '18 OR

I plan to have OME 888 Springs, Bilstein 5100s and Cooper SST 285s. Will start with stock UCA's at this point.

They offer it in a few different configurations and I would like for them to stick out just a bit.

• Wheel Size: 17x8
• Bolt Pattern: 6 on 5.5
• Backspace: 4.5
• Offset: 0

• Wheel Size: 17x9
• Bolt Pattern: 6 on 5.5
• Backspace: 4.75
• Offset: -6

Which would be better? thoughts?

 

I have pro comp rims and they are 0 offset and 4.5" backspacing and they have a nice stance. That's 1 inch wider everywhere than stock

This is an older photo but you can see the stance pretty well. It's about .5" outside my fender flares

 

Thats exactly what look Im looking for. Thanks!

 

No problem man

 

Wider - visually better

Skinnier - more clearance

Is 6X5.5 the right size? I can't recall, I don't remember seeing 5.5 number.

 

Yes, thats the bolt right bolt pattern.

 

I couldn't recall.

 

I would not recommend a 9" wheel but do recommend staying 4.5 BS or below