Rear TSB spring with AAL?

Wondering if anyone has put an AAL on their 2nd gen. with the rear tsb done? looking to see what they set the front suspension to to level it out... thanks everyone!

 

Toytec makes an AAL specifically for the trucks with the TSB. Most set their billy's to 2.5 in front and are pretty level.

 

right i saw that... but i read that people are getting about 1.5 inches from the tsb spring and the AAL for the tsb would add another 1.5. the AAL kit without the tsb adds 2 inches. so im just curious if people are going up to the full 3" on the C/O since youre getting 3" from boths springs instead of 2" with the single AAL...

 

Gotcha. If it helps you any, my TSB has already settled from 1.5" to 1" over the last month. I'm level at 1.75" in the front. So you may end up being a little nose-high @ 3" on the CO's. I'll let someone with first-hand experience chime in though.

 

sweet. that helps a lot actually, i was kinda wondering how much it would end up settling. you pretty much answered what i was asking. thanks a lot! hopefully ill be getting my ultimate lift kit within the next month or so. after i get the tsb though

 

I have the TSB and toytec TSB 1.5 AAL... check out my build for pics

the rear is slightly higher

 

looks good man! i like it, i didnt see what you have your front set to though...