1st Gen Lunchtable Thread - General Discussion

$100 Rough Country 8" Black Series Single Row CREE LED Light Bar | Pair - 70728BL

https://www.amazon.com/gp/product/B01H7KD2GY/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1 these are on the corner of my bumper shine as far as my KC lights in the middle but give me the wide beam i needed to spot deer in fields close to the road.

$165 KC HiLiTES 490 Rally 400 4" 55w Driving Light System,Black

https://www.amazon.com/gp/product/B008KX06RQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 and the KC lights in the middle. there adjusted to start lighting at the edge of my highbeams and give me easily 200-250 yards of total visibility.

 

i'll probably do the headers and increase the exhaust to 3" all the way back. and if I have to i'll do the o2 sensor deletes.

 

Three inch is too much really, 2.5 is easier to route and still overkill for such a small engine. If you had a turbo I'd say three inch might be worth it but still 2.5 would be fine in most cases with a turbo on this engine too.

I'd leave the O2 system alone if I were you, your truck uses the O2 to calibrate the AFR sensor.

 

I fucking hate when they make new guys wait on there own. Because thEy always suck and are hella slow so i have to come out th kitchen even though i busy just so i can get food out a d take orders so people dont wait forever

 

Good call and itlit give me that down shift grumble still I love that sound

 

I just miss the paycheck that came with shooting E-6... day rate now is a fraction of what it used to be... i didn't switch to digital until 2004 and only because my agency made all of their photogs make the switch... i have boxes of slide in storage from 1999 to 2004 all sealed and taking up space... hahaha

 

Budget rents pick up trucks...

JUST SAYIN'

hahahahahha

 

https://youtu.be/rX5Z_aomQmI

 

So much want

 

Aww, that's a bummer. That is @Nay from IH8MUD. That 80 is a monster and does quite a bit with very stock geometry. Can't believe she's getting rid of it.

 

It looks pretty capable haha

 

You dont need a lsd to do doughnuts

 

Just go on dirt

 

Or ice...... wait Texas crap

 

But taking LSD will make your donuts way better

 

So does enterprise

 

Is this a decent method of resolving rust issues? I’d like to get it done before I leave for college on the 21st. https://youtu.be/EYWP-KfnbKE
He uses the rustoleum rust reformer and rustoleum rubberized undercoating.

 

Take lsd with a lsd in the diff.

 

Go with paint. Rubberized undercoating can actually trap moisture. I used Rustoleum rattle cans. And if its really bad, use the reformer stuff. To do the inside of the frame, Eastwood sells their rust encapsulator with a long hose on the end. Thats how I would tackle it.

 

If you don’t mind, could you link the paint you’re talking about? Thanks