What have you done to your Tacoma today? 1st Gen Edition

Yup looks like it. Bank 2 has the bolt on flange, long wire & grommet cause the plug sits inside the cab. Denso replacements is what I use too, some others don't come with the grommet.

Bank 1 is the typical style, round that with threads that screws in.

 

Got me some new wheels, just picked em up from UPS.

 

https://www.instructables.com/id/Hack-your-car-badges/

 

SPC Light racing's new UCA spindle inserts. Just released last Monday. They have a split in them so as you tighten the upper ball joint the spread out. Makes for a better tighter fit in the spindle.

 

I am hoping to have all 4 done in the next year or so. Just gonna pay Toyota so in case something gets messed up its on them and not me.

 

Broke a thing, then fixed it and broke another thing the next day.





The place I broke my second thing on (and subsequently did not make the obstacle) I watched a built bronco roll on HARD minutes later.

 

That's exactly how my passenger side CV looked when it busted on me. Broke the inner joint...could still drive it just fine as long as I was in 2wd. In 4x4 it felt and sounded like I was driving over potholes.

 

Same but the outer joint... Mine clunked around like crazy though

 

What was the reason for the release?

 

That's what I was expecting to happen since I have ADD as well, but when I disengaged 4wd the clunking went away and I could drive around seemingly like normal. Figured it was because the joint connected to the wheel was still intact, I guess

 

I guess some of the inserts were coming loose in the spindle.

 

Just googled something about that, crazy.

 

Yeah not exactly sure what other thing I broke. Passenger side is def disconnected now but the CV looks fine, so the current working theory is something in the ADD tube blew. The snap was much quieter than when this CV went.

 

It took me about an hour to tape off the "TOYOTA" emblem on the tailgate, lol. Having to cut tiny pieces of tape to line the edges of the lettering. I kind of like stuff like that though, like small puzzles and such...so I didn't mind. Had a few beers while I did it in the shade of the driveway, wasn't too bad. But yeah it's almost impossible to get the edges perfect, but luckily Plastidip comes right off so you don't have to worry about it if that happens. Just use the end of a toothpick to clean the edges, or a razorblade if your daring. If I were using actual paint I would definitely take them emblems off to paint them, or just buy blacked out ones and replace with those.

 

Damn, I miss a weekend and you destroy the front end!
Could be either the shift fork broke/ seized, or.......

You broke this guy.

 

I agree!!!

 

ouch, damn I must have gotten lucky then. I was telling someone about it and they told me that the inner joint rarely fails, it's usually the outer joint and that I may have broken something else. But that was 6 months ago and after replacing the CV it's been fine, so I guess I somehow managed to actually only blow the inner joint.

Happened when I turned into a gas station and forgot to switch 4hi off...the roads were covered in ice up in the mountains but the gas station was covered and had dry concrete. Won't make that mistake again

 

I hear ya, I've never done wheel bearings before & I really don't feeling like trying either, not on this truck anyway. For the rear I took it to a well known rear end shop. Also just got regeared from them too recently. I just wish they did other work besides rear ends. Hard to find good shops that you fully trust, part of why I started working on my own cars.

 

Yeah i was in full #NFG mode this past weekend. Still upset I didn't make it all the way up Jotter's, especially since I almost had it that one time but couldn't fully commit for fear I would end up like that bronco did. It was a good thing I tried it before I witnessed that too. The sad part is everyone was done for the day but I suggested we do Jotter's because I always wanted to give it a go. The guy Jim was just wheeling with us, and originally said he wasn't even going to attempt it, and then last minute changed his mind. In case any of you want to see the video I am referring to, it's this.

https://www.youtube.com/watch?v=RiqxpNOit5k

I only got halfway up when I broke my shit. He got further than me though.

 

holy shit, that's gnarly. Glad he was wearing his belt, at least it seems like it. Figure he would've been a goner otherwise...assuming he's okay?