Road Tested My Sensors

I am planning on getting a lift in the fall on my 2018 TRD ORDC when it cools off. I wanted to see what all the hubbub is about with respects to the sensor errors.

I put a piece of cardboard over my grill emblem No issues with the BSM, adaptive cc, lane change.

Then, in addition to the emblem cover I put a piece of cardboard over the windshield sensor. the BSM & adaptive cc worked, but not the lane change.

I did not know what to expect.

 

I thought the grill sensor was slightly under the emblem. I am probably wrong though.

 

On the Pro it is below

 

On the pro grille thread, people weren't seeing errors until upwards of 20 miles after things were altered.

 

So what are your concerns with a lift?

Most have changed out the grille with the Pro grille and haven't had any issues. Most have lifted their trucks about 3" with no issues yet reported. I have done both of these and haven't had any issues with any of the TSS system.

 

There have been intermittent reports of errors coming up after installing lifts & changing out grills. I am just bored...

 

This looks very scientific.

 

You've probably got people taking pictures, posting them to motor trend as spy shots of a 19 Tacoma.

 

You have no idea!!

Like I said, I'm bored. It's 120 degrees in Phx & even the pool is too warm!!

 

I've noticed that the crash avoidance is sensitive farther in front. Applys the brakes too soon. I have 3" lift and 285s

 

I tried wearing some cardboard and got no errors on my ‘17